colibri-imx6ull/imx7: define bootubipart for distro boot

[oweals/u-boot.git] / include / configs / gplugd.h

diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
index 0ac198df8d600d637a750fb3710524a19777cfc3..a0554d7f8e5b047785784d96f3cacc14137b7d6a 100644 (file)
--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -1,79 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011
  * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
  *
  * Based on Aspenite:
  * (C) Copyright 2010
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  * Contributor: Mahavir Jain <mjain@marvell.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_GPLUGD_H
 #define __CONFIG_GPLUGD_H
 
-/*
- * FIXME: fix for error caused due to recent update to mach-types.h
- */
-#include <asm/mach-types.h>
-#ifdef MACH_TYPE_SHEEVAD
-#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
-#else
-#define MACH_TYPE_SHEEVAD      2625
-#endif
-
-/*
- * Generic board support
- */
-#define CONFIG_SYS_GENERIC_BOARD
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING    "\nMarvell-gplugD"
-
 /*
  * High Level Configuration Options
  */
 #define CONFIG_SHEEVA_88SV331xV5       1       /* CPU Core subversion */
 #define CONFIG_ARMADA100               1       /* SOC Family Name */
 #define CONFIG_ARMADA168               1       /* SOC Used on this Board */
-#define CONFIG_MACH_TYPE               MACH_TYPE_SHEEVAD /* Machine type */
+#define CONFIG_MACH_TYPE               MACH_TYPE_GPLUGD /* Machine type */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
 
-#define        CONFIG_SYS_TEXT_BASE    0x00f00000
-
 /*
  * There is no internal RAM in ARMADA100, using DRAM
  * TBD: dcache to be used for this
  */
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_TEXT_BASE - 0x00200000)
-#define CONFIG_NR_DRAM_BANKS_MAX       2
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_I2C
-#undef CONFIG_CMD_FPGA
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
-/* Disable DCACHE */
-#define CONFIG_SYS_DCACHE_OFF
 
 /* Network configuration */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PING
 #define CONFIG_ARMADA100_FEC
 
 /* DHCP Support */
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY                50000
 #endif /* CONFIG_CMD_NET */
 
@@ -81,8 +41,6 @@
 #define CONFIG_MARVELL_GPIO
 
 /* PHY configuration */
-#define CONFIG_MII
-#define CONFIG_CMD_MII
 #define CONFIG_RESET_PHY_R
 /* 88E3015 register definition */
 #define PHY_LED_PAR_SEL_REG            22
@@ -91,21 +49,13 @@
 /* GPIO Configuration for PHY */
 #define CONFIG_SYS_GPIO_PHY_RST                104     /* GPIO104 */
 
-/* SPI Support */
-#define CONFIG_ARMADA100_SPI
-#define CONFIG_ENV_SPI_CS              110
-#define CONFIG_SYS_SSP_PORT            2
-
 /* Flash Support */
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_ATMEL
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
  */
 #include "mv-common.h"
-#undef CONFIG_ARCH_MISC_INIT
 
 #ifdef CONFIG_SYS_NS16550_COM1
 #undef CONFIG_SYS_NS16550_COM1
@@ -116,24 +66,10 @@
 /*
  * Environment variables configurations
  */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SECT_SIZE           0x4000
-#define CONFIG_ENV_SIZE                        0x4000
-#define CONFIG_ENV_OFFSET              0x07C000
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_SAVEENV
 
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ARMADA100
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
 #endif /* CONFIG_CMD_USB */
 
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-
 #endif /* __CONFIG_GPLUGD_H */