ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs

[oweals/u-boot.git] / include / configs / gcplus.h

diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index c0b3ab91e433c74cdb9263419100b9b0bffe5ce8..41294b9be62a64505dbfa50c0770820c24af105d 100644 (file)
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -36,7 +36,7 @@
  * e.g. bootp/tftp download of the kernel is a far more convenient
  * when testing new kernels on this target. However the ADS GCPlus Linux
  * boot ROM leaves the MMU enabled when it passes control to U-Boot. So
- * we use lowlevel_init (CONFIG_INIT_CRITICAL) to remedy that problem.
+ * we use lowlevel_init (!CONFIG_SKIP_LOWLEVEL_INIT) to remedy that problem.
  */
 #undef  CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_SKIP_RELOCATE_UBOOT     1
@@ -49,6 +49,8 @@
 #define CONFIG_GCPLUS          1       /* on an ADS GCPlus Board      */
 
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
 
 #define CONFIG_CMDLINE_TAG      1      /* enable passing of ATAGs      */
 #define CONFIG_SETUP_MEMORY_TAGS 1
@@ -64,12 +66,14 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_DRIVER_LAN91C96 /* we have an SMC9194 on-board */
+#define CONFIG_NET_MULTI
+#define CONFIG_LAN91C96        /* we have an SMC9194 on-board */
 #define CONFIG_LAN91C96_BASE   0x100e0000
 
 /*
  * select serial console configuration
  */
+#define CONFIG_SA1100_SERIAL
 #define CONFIG_SERIAL3          1      /* we use SERIAL 3 on ADS GCPlus */
 
 /* allow to overwrite serial and ethaddr */
@@ -118,8 +122,6 @@
 #define CONFIG_SYS_MEMTEST_START       0xc0400000      /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0xc0800000      /* 4 ... 8 MB in DRAM   */
 
-#undef  CONFIG_SYS_CLKS_IN_HZ          /* everything, incl board info, in Hz */
-
 #define        CONFIG_SYS_LOAD_ADDR            0xc0000000      /* default load address */
 
 #define        CONFIG_SYS_HZ                   3686400         /* incrementer freq: 3.6864 MHz */