Merge with git://www.denx.de/git/u-boot.git

[oweals/u-boot.git] / include / configs / ep8248.h

diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 04147a55d1d1c790cc5df2c9c16993f532acd8d2..85ad70a0d5083ddccb2d54a94873eaf70497de25 100644 (file)
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -60,8 +60,8 @@
  * SCC, 1-3 for FCC)
  *
  * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
  */
 #undef CONFIG_ETHER_ON_SCC             /* Ethernet is not on SCC */
 #define CONFIG_ETHER_ON_FCC            /* Ethernet is on FCC     */
@@ -123,23 +123,34 @@
 
 #define CONFIG_BAUDRATE                38400
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL   \
-                               | CFG_CMD_DHCP    \
-                               | CFG_CMD_ECHO    \
-                               | CFG_CMD_I2C     \
-                               | CFG_CMD_IMMAP   \
-                               | CFG_CMD_MII     \
-                               | CFG_CMD_PING    \
-                               )
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND     "bootm FF860000"        /* autoboot command */
 #define CONFIG_BOOTARGS                "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef CONFIG_KGDB_ON_SMC              /* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC             /* define if kgdb on SCC */
 #undef CONFIG_KGDB_NONE                /* define if kgdb on something else */
@@ -157,7 +168,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -183,20 +194,20 @@
 
 #define        CFG_DIRECT_FLASH_TFTP
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS2_FIRST_BANK   0
 #define CFG_JFFS2_NUM_BANKS    CFG_MAX_FLASH_BANKS
 #define CFG_JFFS2_FIRST_SECTOR  0
 #define CFG_JFFS2_LAST_SECTOR   62
 #define CFG_JFFS2_SORT_FRAGMENTS
 #define CFG_JFFS_CUSTOM_PART
-#endif /* CFG_CMD_JFFS2 */
+#endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C                1       /* To enable I2C support        */
 #define CFG_I2C_SPEED          100000  /* I2C speed                    */
 #define CFG_I2C_SLAVE          0x7F    /* I2C slave address            */
-#endif /* CFG_CMD_I2C */
+#endif
 
 #define CFG_MONITOR_BASE       TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -240,7 +251,7 @@
 #define CFG_BOOTMAPSZ          (8 << 20)       /* Initial Memory map for Linux */
 
 #define CFG_CACHELINE_SIZE     32      /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
 #endif