checkpatch.pl: Request if() instead #ifdef

[oweals/u-boot.git] / include / configs / embestmx6boards.h

diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index 61f0c95d550e28f6cdadbf7111358f957cd628c0..24a0025eda3d953bb1a378928389b7bf5d213abc 100644 (file)
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Eukréa Electromatique
  * Author: Eric Bénard <eric@eukrea.com>
@@ -6,8 +7,6 @@
  *
  * based on mx6*sabre*.h which are :
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __RIOTBOARD_CONFIG_H
@@ -34,8 +33,6 @@
 #define CONFIG_SYS_I2C_SPEED           100000
 
 /* USB Configs */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -45,34 +42,14 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         4
 
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS          0
-#define CONFIG_SF_DEFAULT_CS           0
-#define CONFIG_SF_DEFAULT_SPEED                20000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-#endif
-
 #define CONFIG_ARP_TIMEOUT     200UL
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MEMTEST_START       0x10000000
-#define CONFIG_SYS_MEMTEST_END         0x10010000
-#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
-
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -85,42 +62,43 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_ENV_SIZE                        (8 * 1024)
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* RiOTboard */
 #define CONFIG_FDTFILE "imx6dl-riotboard.dtb"
 #define CONFIG_SYS_FSL_USDHC_NUM       3
 #define CONFIG_SYS_MMC_ENV_DEV         2       /* SDHC4 */
-#define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
-#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 /* MarSBoard */
 #define CONFIG_FDTFILE "imx6q-marsboard.dtb"
 #define CONFIG_SYS_FSL_USDHC_NUM       2
-#define CONFIG_ENV_OFFSET              (768 * 1024)
-#define CONFIG_ENV_SECT_SIZE           (8 * 1024)
-#define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 #endif
 
 /* Framebuffer */
-#define CONFIG_VIDEO_IPUV3
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+/* RiOTboard */
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6dl-riotboard.dtb"
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0 /* offset 69KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0 /* offset 69KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* offset 69KB */
+
+#endif
+
 /* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
  * 1M script, 1M pxe and the ramdisk at the end */
 #define MEM_LAYOUT_ENV_SETTINGS \
@@ -139,10 +117,6 @@
        func(PXE, pxe, na) \
        func(DHCP, dhcp, na)
 
-#define CONFIG_BOOTCOMMAND \
-       "run finduuid; " \
-       "run distro_bootcmd"
-
 #include <config_distro_bootcmd.h>
 
 #define CONSOLE_STDIN_SETTINGS \