hawkboard: Add CONFIG_SPL_LIBGENERIC_SUPPORT

[oweals/u-boot.git] / include / configs / efikamx.h

diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index ce96b7883949005a58f0a124b2a31d017012ff1b..120055f1d757e9984701bd0a89a17107e87e00ba 100644 (file)
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -44,6 +44,10 @@
 
 #define CONFIG_SYS_TEXT_BASE           0x97800000
 
+#define        CONFIG_L2_OFF
+#define        CONFIG_SYS_ICACHE_OFF
+#define        CONFIG_SYS_DCACHE_OFF
+
 /*
  * Bootloader Components Configuration
  */
@@ -53,6 +57,8 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DATE
 #undef CONFIG_CMD_IMLS
 
 /*
@@ -85,7 +91,7 @@
  * Hardware drivers
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE           UART1_BASE
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
@@ -107,7 +113,7 @@
 
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_CS            (1 | 121 << 8)
+#define CONFIG_SF_DEFAULT_CS           (1 | 121 << 8)
 #define CONFIG_SF_DEFAULT_MODE         (SPI_MODE_0)
 #define CONFIG_SF_DEFAULT_SPEED                25000000
 
@@ -124,12 +130,15 @@
 #endif
 
 /* SPI PMIC */
-#define CONFIG_FSL_PMIC
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS            0
 #define CONFIG_FSL_PMIC_CS             (0 | 120 << 8)
 #define CONFIG_FSL_PMIC_CLK            25000000
 #define CONFIG_FSL_PMIC_MODE           (SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783
+#define CONFIG_FSL_PMIC_BITLEN 32
+#define CONFIG_RTC_MC13XXX
 #endif
 
 /*
@@ -171,18 +180,46 @@
 #define CONFIG_MXC_ATA_PIO_MODE                4
 #endif
 
+/*
+ * USB
+ */
+#define        CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define        CONFIG_USB_EHCI                 /* Enable EHCI USB support */
+#define        CONFIG_USB_EHCI_MX5
+#define        CONFIG_USB_ULPI
+#define        CONFIG_USB_ULPI_VIEWPORT
+#define        CONFIG_MXC_USB_PORT     1
+#if    (CONFIG_MXC_USB_PORT == 0)
+#define        CONFIG_MXC_USB_PORTSC   (1 << 28)
+#define        CONFIG_MXC_USB_FLAGS    MXC_EHCI_INTERNAL_PHY
+#else
+#define        CONFIG_MXC_USB_PORTSC   (2 << 30)
+#define        CONFIG_MXC_USB_FLAGS    0
+#endif
+#define        CONFIG_EHCI_IS_TDI
+#define        CONFIG_USB_STORAGE
+#define        CONFIG_USB_HOST_ETHER
+#define        CONFIG_USB_KEYBOARD
+#define        CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_PREBOOT
+/* USB NET */
+#ifdef CONFIG_CMD_NET
+#define        CONFIG_USB_ETHER_ASIX
+#define        CONFIG_CMD_PING
+#define        CONFIG_CMD_DHCP
+#endif
+#endif /* CONFIG_CMD_USB */
+
 /*
  * Filesystems
  */
 #ifdef CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
+#ifdef CONFIG_CMD_NET
+#define        CONFIG_CMD_NFS
+#endif
 #endif
-
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_DATE
 
 /*
  * Miscellaneous configurable options
@@ -203,7 +240,7 @@
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0x90000000
-#define CONFIG_SYS_MEMTEST_END         0x10000
+#define CONFIG_SYS_MEMTEST_END         0x90010000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR