mmc: fsl_esdhc: Fix SDR104 and HS200 support

[oweals/u-boot.git] / include / configs / ds414.h

diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 69217143f982f8686fd278b759d46a89ead7f8f0..a92e788a38b9ed895f95be6846c514c6317fe7a3 100644 (file)
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_SYNOLOGY_DS414_H
@@ -10,7 +9,6 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
@@ -19,10 +17,6 @@
  */
 #define CONFIG_SYS_TCLK                250000000       /* 250MHz */
 
-/*
- * Commands configuration
- */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MVTWSI
@@ -30,24 +24,12 @@
 #define CONFIG_SYS_I2C_SLAVE           0x0
 #define CONFIG_SYS_I2C_SPEED           100000
 
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED                1000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
-
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_OFFSET              0x7E0000   /* RedBoot config partition in DTS */
-#define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
 
-#define CONFIG_PHY_MARVELL             /* there is a marvell phy */
-#define CONFIG_PHY_ADDR                        { 0x1, 0x0 }
 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
@@ -67,7 +49,6 @@
 #endif
 
 /* why is this only defined in mv-common.h if CONFIG_DM is undefined? */
-#define CONFIG_SYS_MVFS
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -90,7 +71,6 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_TEXT_BASE           0x40004030
 #define CONFIG_SPL_MAX_SIZE            ((128 << 10) - 0x4030)
 
 #define CONFIG_SPL_BSS_START_ADDR      (0x40000000 + (128 << 10))
@@ -103,9 +83,10 @@
 #define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
 
+#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI)
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x24000
+#define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS
+#endif
 
 /* DS414 bus width is 32bits */
 #define CONFIG_DDR_32BIT
@@ -113,7 +94,5 @@
 /* Default Environment */
 #define CONFIG_BOOTCOMMAND     "sf read ${loadaddr} 0xd0000 0x700000; bootm"
 #define CONFIG_LOADADDR                0x80000
-#undef CONFIG_PREBOOT          /* override preboot for USB and SPI flash init */
-#define CONFIG_PREBOOT         "usb start; sf probe"
 
 #endif /* _CONFIG_SYNOLOGY_DS414_H */