#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
#define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */
-#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFFF00000 boot high (standard configuration)
+ * 0xFE000000 boot low
+ * 0x00100000 boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */
+#endif
-#define BOOTFLAG_COLD 0x01
-#define BOOTFLAG_WARM 0x02
+#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1
#define CONFIG_PCI_SCAN_SHOW 1
+#define CONFIG_PCI_BOOTDELAY 250
#define CONFIG_PCI_MEM_BUS 0x40000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_DOS_PARTITION
#define CONFIG_BZIP2
+/*
+ * Video
+ */
+#define CONFIG_VIDEO
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_MB862xx
+#define CONFIG_VIDEO_MB862xx_ACCEL
+#define CONFIG_VIDEO_CORALP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */
+
+/* Coral-PA clock frequency, geo and other both 133MHz */
+#define CONFIG_SYS_MB862xx_CCF 0x00050000
+/* Video SDRAM parameters */
+#define CONFIG_SYS_MB862xx_MMR 0x11d7fa72
+#endif
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
#define CONFIG_CMD_DFL
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DATE
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
-#if (TEXT_BASE == 0xFF000000)
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
#define CONFIG_SYS_LOWBOOT 1
#endif
#undef CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "console=ttyPSC0\0" \
- "kernel_addr_r=400000\0" \
- "fdt_addr_r=600000\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:"\
- "${netmask}:${hostname}:${netdev}:off panic=1\0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "fw_image=digsyMPC.img\0" \
+ "mtcb_start=mtc led diag orange; run mtcb_1\0" \
+ "mtcb_clearled=for x in user1 user2 usbpwr usbbusy; " \
+ "do mtc led $x; done\0" \
+ "mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; " \
+ "else run mtcb_fw; fi\0" \
+ "mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; " \
+ "else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0" \
+ "mtcb_update=mtc led user1 orange;" \
+ "while mtc key; do ; done; run mtcb_2;\0" \
+ "mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0" \
+ "mtcb_usb1=if fatload usb 0 400000 script.img; " \
+ "then run mtcb_doscript; else run mtcb_usb2; fi\0" \
+ "mtcb_usb2=if fatload usb 0 400000 $fw_image; " \
+ "then run mtcb_dousb; else run mtcb_ide; fi\0" \
+ "mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; " \
+ "run mtcb_wait_flickr mtcb_ds_1;\0" \
+ "mtcb_ds_1=if imi 400000; then mtc led usbbusy; " \
+ "source 400000; else run mtcb_error; fi\0" \
+ "mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0" \
+ "mtcb_du_1=if imi 400000; then run mtcb_du_2; " \
+ "else run mtcb_error; fi\0" \
+ "mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; " \
+ "run mtcb_checkfw\0" \
+ "mtcb_checkfw=if imi ff000000; then run mtcb_success; " \
+ "else run mtcb_error; fi\0" \
+ "mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \
+ "mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0" \
+ "mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\
+ "mtcb_uledflckr=mtc led user1 orange 11\0" \
+ "mtcb_error=mtc led user1 red\0" \
+ "mtcb_clear=erase ff000000 ff0fffff\0" \
+ "mtcb_prog=cp.b 400000 ff000000 ${filesize}\0" \
+ "mtcb_success=mtc led user1 green\0" \
+ "mtcb_ide=if fatload ide 0 400000 $fw_image;" \
+ "then run mtcb_doide; else run mtcb_error; fi\0" \
+ "mtcb_doide=mtc led user2 green 1;" \
+ "run mtcb_wait_flickr mtcb_di_1;\0" \
+ "mtcb_di_1=if imi 400000; then run mtcb_di_2;" \
+ "else run mtcb_error; fi\0" \
+ "mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0" \
+ "ramdisk_num_sector=16\0" \
+ "flash_base=ff000000\0" \
+ "flashdisk_size=e00000\0" \
+ "env_sector=fff60000\0" \
+ "flashdisk_start=ff100000\0" \
+ "load_cmd=tftp 400000 digsyMPC.img\0" \
+ "clear_cmd=erase ff000000 ff0fffff\0" \
+ "flash_cmd=cp.b 400000 ff000000 ${filesize}\0" \
+ "update_cmd=run load_cmd; " \
+ "iminfo 400000; " \
+ "run clear_cmd flash_cmd; " \
+ "iminfo ff000000\0" \
+ "spi_driver=yes\0" \
+ "spi_watchdog=no\0" \
+ "ftps_start=yes\0" \
+ "ftps_user1=admin\0" \
+ "ftps_pass1=admin\0" \
+ "ftps_base1=/\0" \
+ "ftps_home1=/\0" \
+ "plc_sio_srv=no\0" \
+ "plc_sio_baud=57600\0" \
+ "plc_sio_parity=no\0" \
+ "plc_sio_stop=1\0" \
+ "plc_sio_com=2\0" \
+ "plc_eth_srv=yes\0" \
+ "plc_eth_port=1200\0" \
+ "plc_root=/ide/\0" \
+ "diag_level=0\0" \
+ "webvisu=no\0" \
+ "plc_can1_routing=no\0" \
+ "plc_can1_baudrate=250\0" \
+ "plc_can2_routing=no\0" \
+ "plc_can2_baudrate=250\0" \
+ "plc_can3_routing=no\0" \
+ "plc_can3_baudrate=250\0" \
+ "plc_can4_routing=no\0" \
+ "plc_can4_baudrate=250\0" \
+ "netdev=eth0\0" \
+ "console=ttyPSC0\0" \
+ "kernel_addr_r=400000\0" \
+ "fdt_addr_r=600000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:${hostname}:${netdev}:off panic=1\0" \
"addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
- "tftp ${fdt_addr_r} ${fdt_file};" \
- "run nfsargs addip addcons;" \
- "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "load=tftp 200000 ${u-boot}\0" \
- "update=protect off FFF00000 +${filesize};" \
- "erase FFF00000 +${filesize};" \
- "cp.b 200000 FFF00000 ${filesize};" \
- "protect on FFF00000 +${filesize}\0" \
+ "rootpath=/opt/eldk/ppc_6xx\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
+ "tftp ${fdt_addr_r} ${fdt_file};" \
+ "run nfsargs addip addcons;" \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "load=tftp 200000 ${u-boot}\0" \
+ "update=protect off FFF00000 +${filesize};" \
+ "erase FFF00000 +${filesize};" \
+ "cp.b 200000 FFF00000 ${filesize};" \
+ "protect on FFF00000 +${filesize}\0" \
""
+#define CONFIG_BOOTCOMMAND "run mtcb_start"
+
+/*
+ * SPI configuration
+ */
+#define CONFIG_HARD_SPI 1
+#define CONFIG_MPC52XX_SPI 1
+
/*
* I2C configuration
*/
/*
* RTC configuration
*/
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_I2C_RTC_ADDR 0x56
+#define CONFIG_RTC_RV3029
+/* Enable 5k Ohm trickle charge resistor */
+#define CONFIG_SYS_RV3029_TCR 0x20
+#else
#define CONFIG_RTC_DS1337
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_DS1339_TCR_VAL 0xAB /* diode + 4k resistor */
+#endif
+
+/* ExBo I2C Addresses */
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_EXBO_EE_I2C_ADDRESS 0x54
+#else
+#define CONFIG_SYS_EXBO_EE_I2C_ADDRESS 0x56
+#endif
/*
* Flash configuration
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_FLASH_BASE 0xFE000000
+#define CONFIG_SYS_FLASH_BASE_CS1 0xFC000000
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
+ CONFIG_SYS_FLASH_BASE_CS1}
+#define CONFIG_SYS_UPDATE_FLASH_SIZE
+#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+#else
#define CONFIG_SYS_FLASH_BASE 0xFF000000
-#define CONFIG_SYS_FLASH_SIZE 0x01000000
-
#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+#endif
+
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_FLASH_16BIT
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_FLASH_SIZE 0x01000000
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
* Use SRAM until RAM will be available
*/
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
+#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_SIZE 4096
#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT 1
#endif
*/
#define CONFIG_MPC5xxx_FEC 1
#define CONFIG_MPC5xxx_FEC_MII100
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_PHY_ADDR 0x01
+#else
#define CONFIG_PHY_ADDR 0x00
+#endif
#define CONFIG_PHY_RESET_DELAY 1000
#define CONFIG_NETCONSOLE /* include NetConsole support */
/*
* GPIO configuration
+ * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1)
+ * Bit 0 (mask 0x80000000) : 0x1
+ * SPI on Tmr2/3/4/5 pins
+ * Bit 2:3 (mask 0x30000000) : 0x2
+ * ATA cs0/1 on csb_4/5
+ * Bit 6:7 (mask 0x03000000) : 0x2
+ * Ethernet 100Mbit with MD
+ * Bits 12:15 (mask 0x000f0000): 0x5
+ * USB - Two UARTs
+ * Bits 18:19 (mask 0x00003000) : 0x2
+ * PSC3 - USB2 on PSC3
+ * Bits 20:23 (mask 0x00000f00) : 0x1
+ * PSC2 - CAN1&2 on PSC2 pins
+ * Bits 25:27 (mask 0x00000070) : 0x1
+ * PSC1 - AC97 functionality
+ * Bits 29:31 (mask 0x00000007) : 0x2
*/
#define CONFIG_SYS_GPS_PORT_CONFIG 0xA2552112
*/
#define CONFIG_SYS_LONGHELP
#define CONFIG_AUTO_COMPLETE 1
+#define CONFIG_CMDLINE_EDITING 1
#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS0_CFG 0x0002DD00
+#if defined(CONFIG_DIGSY_REV5)
+#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE_CS1
+#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_CS1_CFG 0x0002DD00
+#endif
+
#define CONFIG_SYS_CS_BURST 0x00000000
#define CONFIG_SYS_CS_DEADCYCLE 0x11111111
#define CONFIG_LBA48 1
#endif /* __CONFIG_H */
-