powerpc/85xx: Fix NAND SPL support

[oweals/u-boot.git] / include / configs / devkit8000.h

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 710092de36d357bb2d6cf020f1f579d600c29dcf..6c51a274750aeb16be539c343d0f8ac7fb0f7f61 100644 (file)
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -73,7 +73,6 @@
 #define CONFIG_OMAP3_MICRON_DDR                1
 
 /* DM9000 */
-#define CONFIG_NET_MULTI               1
 #define CONFIG_NET_RETRY_COUNT         20
 #define        CONFIG_DRIVER_DM9000            1
 #define        CONFIG_DM9000_BASE              0x2c000000
@@ -181,7 +180,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
-       "console=ttyS2,115200n8\0" \
+       "console=ttyO2,115200n8\0" \
        "mmcdev=0\0" \
        "vram=12M\0" \
        "dvimode=1024x768MR-16@60\0" \
@@ -308,4 +307,58 @@
                                                         CONFIG_SYS_INIT_RAM_SIZE - \
                                                         GENERATED_GBL_DATA_SIZE)
 
+/* SRAM config */
+#define CONFIG_SYS_SRAM_START              0x40200000
+#define CONFIG_SYS_SRAM_SIZE               0x10000
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_NAND_SIMPLE
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+
+#define CONFIG_SPL_TEXT_BASE           0x40200000 /*CONFIG_SYS_SRAM_START*/
+#define CONFIG_SPL_MAX_SIZE            0xB400  /* 45 K */
+#define CONFIG_SPL_STACK               LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR      0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
+#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_PAGE_SIZE      2048
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
+#define CONFIG_SYS_NAND_ECCPOS         {2, 3, 4, 5, 6, 7, 8, 9,\
+                                               10, 11, 12, 13}
+
+#define CONFIG_SYS_NAND_ECCSIZE                512
+#define CONFIG_SYS_NAND_ECCBYTES       3
+
+#define CONFIG_SYS_NAND_ECCSTEPS       (CONFIG_SYS_NAND_PAGE_SIZE / \
+                                               CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * \
+                                               CONFIG_SYS_NAND_ECCSTEPS)
+
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x200000
+
+#define CONFIG_SYS_SPL_MALLOC_START    0x80108000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000        /* 1 MB */
+
 #endif /* __CONFIG_H */