sh: Fix compile error sh7763rdp board

[oweals/u-boot.git] / include / configs / dbau1x00.h

diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 0a10e3c75b4c0bdd6c5d9c97afaa95f880c455fd..0e10396dfa9659e91f7aeb871d3cba23d0f9d014 100644 (file)
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -30,21 +30,21 @@
 
 #define CONFIG_MIPS32          1  /* MIPS32 CPU core   */
 #define CONFIG_DBAU1X00                1
-#define CONFIG_AU1X00          1  /* alchemy series cpu */
+#define CONFIG_SOC_AU1X00      1  /* alchemy series cpu */
 
 #ifdef CONFIG_DBAU1000
 /* Also known as Merlot */
-#define CONFIG_AU1000          1
+#define CONFIG_SOC_AU1000      1
 #else
 #ifdef CONFIG_DBAU1100
-#define CONFIG_AU1100          1
+#define CONFIG_SOC_AU1100      1
 #else
 #ifdef CONFIG_DBAU1500
-#define CONFIG_AU1500          1
+#define CONFIG_SOC_AU1500      1
 #else
 #ifdef CONFIG_DBAU1550
 /* Cabernet */
-#define CONFIG_AU1550           1
+#define CONFIG_SOC_AU1550      1
 #else
 #error "No valid board set"
 #endif
@@ -75,22 +75,57 @@
 #ifdef CONFIG_DBAU1550
 /* Boot from flash by default, revert to bootp */
 #define CONFIG_BOOTCOMMAND     "bootm 0xbfc20000; bootp; bootm"
-
-#define CONFIG_COMMANDS                ((CONFIG_CMD_DFL | CFG_CMD_FLASH | CFG_CMD_LOADB | CFG_CMD_NET) & \
-                                ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FPGA | CFG_CMD_IDE | \
-                                  CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \
-                                  CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C))
 #else /* CONFIG_DBAU1550 */
-/* Boot from Compact flash partition 2 as default */
-#define CONFIG_BOOTCOMMAND     "ide reset;disk 0x81000000 0:2;bootm"
-
-#define CONFIG_COMMANDS                ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \
-                                ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
-                                  CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | \
-                                  CFG_CMD_ELF | CFG_CMD_BDI | CFG_CMD_BEDBUG))
+#define CONFIG_BOOTCOMMAND     "bootp;bootm"
 #endif /* CONFIG_DBAU1550 */
 
-#include <cmd_confdefs.h>
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_RUN
+
+
+#ifdef CONFIG_DBAU1550
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_PCMCIA
+
+#else
+
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DHCP
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+#endif
+
 
 /*
  * Miscellaneous configurable options
@@ -113,7 +148,9 @@
 #error "Invalid CPU frequency - must be multiple of 12!"
 #endif
 
-#define CFG_HZ                  (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
+#define CFG_MIPS_TIMER_FREQ    (CFG_MHZ * 1000000)
+
+#define CFG_HZ                 1000
 
 #define CFG_SDRAM_BASE         0x80000000     /* Cached addr */
 
@@ -133,8 +170,6 @@
 #define PHYS_FLASH_1           0xb8000000 /* Flash Bank #1 */
 #define PHYS_FLASH_2           0xbc000000 /* Flash Bank #2 */
 
-#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
-
 #else /* CONFIG_DBAU1550 */
 
 #define CFG_MAX_FLASH_BANKS    2       /* max number of memory banks */
@@ -145,6 +180,8 @@
 
 #endif /* CONFIG_DBAU1550 */
 
+#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
+
 #define CFG_FLASH_CFI           1
 #define CFG_FLASH_CFI_DRIVER    1