mx6qsabrelite: add and enable USB Host 1 support

[oweals/u-boot.git] / include / configs / davinci_schmoogie.h

diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
index a16ac391b3f3e2dbc20d02de2c8d1af8317e57aa..949174a1637193504bd36607395b4a7d0c4afdbe 100644 (file)
--- a/include/configs/davinci_schmoogie.h
+++ b/include/configs/davinci_schmoogie.h
@@ -19,7 +19,6 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-#include <asm/sizes.h>
 
 /*=======*/
 /* Board */
@@ -27,6 +26,9 @@
 #define SCHMOOGIE
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_SYS_USE_NAND
+#define MACH_TYPE_SCHMOOGIE 1255
+#define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE
+
 /*===================*/
 /* SoC Configuration */
 /*===================*/
@@ -34,11 +36,11 @@
 #define CONFIG_SYS_TIMERBASE           0x01c21400      /* use timer 0 */
 #define CONFIG_SYS_HZ_CLOCK            27000000        /* Timer Input clock freq */
 #define CONFIG_SYS_HZ                  1000
+#define CONFIG_SOC_DM644X
 /*=============*/
 /* Memory Info */
 /*=============*/
 #define CONFIG_SYS_MALLOC_LEN          (0x10000 + 256*1024)    /* malloc() len */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* reserved for initial data */
 #define CONFIG_SYS_MEMTEST_START       0x80000000      /* memtest start address */
 #define CONFIG_SYS_MEMTEST_END         0x81000000      /* 16MB RAM test */
 #define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
@@ -81,11 +83,11 @@
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS             2
 #define CONFIG_ENV_IS_IN_NAND          /* U-Boot env in NAND Flash  */
 #define CONFIG_ENV_SECT_SIZE   2048    /* Env sector Size */
-#define CONFIG_ENV_SIZE                SZ_128K
+#define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
 #define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is loaded by a bootloader */
-#define CONFIG_SKIP_RELOCATE_UBOOT     /* to a proper address, init done */
 #define CONFIG_SYS_NAND_BASE           0x02000000
 #define CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND devices */
@@ -95,7 +97,6 @@
 /*=====================*/
 #define CONFIG_RTC_DS1307              /* RTC chip on SCHMOOGIE */
 #define CONFIG_SYS_I2C_RTC_ADDR        0x6f    /* RTC chip I2C address */
-#define CONFIG_HAS_UID
 #define CONFIG_UID_DS28CM00            /* Unique ID on SCHMOOGIE */
 #define CONFIG_SYS_UID_ADDR            0x50    /* UID chip I2C address */
 /*==============================*/
@@ -146,11 +147,17 @@
 #undef CONFIG_CMD_SETGETDCR
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
-/*=======================*/
-/* KGDB support (if any) */
-/*=======================*/
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  1       /* which serial port to use */
+
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
 #endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+
 #endif /* __CONFIG_H */