ARM: tegra: define CONFIG_SYS_BOOTMAPSZ

[oweals/u-boot.git] / include / configs / da850evm.h

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 7c83ecdaf793fc628ea9a88d10d6b39242a4a379..ddd615509fe406bc2b6d5a22d7329057f9edc764 100644 (file)
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -27,7 +27,10 @@
  * Board
  */
 #define CONFIG_DRIVER_TI_EMAC
+/* check if direct NOR boot config is used */
+#ifndef CONFIG_DIRECT_NOR_BOOT
 #define CONFIG_USE_SPIFLASH
+#endif
 
 
 /*
@@ -43,10 +46,19 @@
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SYS_HZ                  1000
-#define CONFIG_SYS_TEXT_BASE           0xc1080000
 #define CONFIG_SYS_DA850_PLL_INIT
 #define CONFIG_SYS_DA850_DDR_INIT
 
+#ifdef CONFIG_DIRECT_NOR_BOOT
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DA8XX_GPIO
+#define CONFIG_SYS_TEXT_BASE           0x60000000
+#define CONFIG_SYS_DV_NOR_BOOT_CFG     (0x11)
+#define CONFIG_DA850_LOWLEVEL
+#else
+#define CONFIG_SYS_TEXT_BASE           0xc1080000
+#endif
+
 /*
  * Memory Info
  */
@@ -62,7 +74,6 @@
 #define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
 
 #define CONFIG_NR_DRAM_BANKS   1 /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE       (256*1024) /* regular stack */
 
 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (      \
        DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
@@ -366,8 +377,19 @@
 #define CONFIG_CMD_MMC
 #endif
 
+#ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE - \
+                                               CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_SPL_MALLOC_SIZE     CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS 0
+#define CONFIG_SPL_SPI_CS 0
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -375,20 +397,24 @@
 #define CONFIG_SPL_STACK       0x8001ff00
 #define CONFIG_SPL_TEXT_BASE   0x80000000
 #define CONFIG_SPL_MAX_SIZE    32768
-
+#endif
 
 /* Load U-Boot Image From MMC */
 #ifdef CONFIG_SPL_MMC_LOAD
 #define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
 #define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SYS_MMC_U_BOOT_OFFS     0x75
-#define CONFIG_SYS_MMC_U_BOOT_SIZE     0x30000
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x75
+#undef CONFIG_SPL_SPI_SUPPORT
 #undef CONFIG_SPL_SPI_LOAD
 #endif
 
 /* additions for new relocation code, must added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0xc0000000
+
+#ifdef CONFIG_DIRECT_NOR_BOOT
+#define CONFIG_SYS_INIT_SP_ADDR                0x8001ff00
+#else
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
                                        GENERATED_GBL_DATA_SIZE)
+#endif /* CONFIG_DIRECT_NOR_BOOT */
 #endif /* __CONFIG_H */