colibri_imx6: remove legacy sdboot wrapper

[oweals/u-boot.git] / include / configs / da850evm.h

diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 41ff6676e06e907992bbc946ed1f28f62b1761e2..41f0813a01982c5d3030996113cec3f7daccbfdc 100644 (file)
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -18,14 +18,6 @@
 #define CONFIG_USE_SPIFLASH
 #endif
 
-/*
-* Disable DM_* for SPL build and can be re-enabled after adding
-* DM support in SPL
-*/
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_I2C
-#undef CONFIG_DM_I2C_COMPAT
-#endif
 /*
  * SoC Configuration
  */
@@ -34,10 +26,9 @@
 #define CONFIG_SYS_OSCIN_FREQ          24000000
 #define CONFIG_SYS_TIMERBASE           DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK            clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
 
 #ifdef CONFIG_DIRECT_NOR_BOOT
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_DV_NOR_BOOT_CFG     (0x11)
 #endif
 
@@ -114,20 +105,11 @@
 /*
  * Serial Driver info
  */
-
-#if !CONFIG_IS_ENABLED(DM_SERIAL)
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1        DAVINCI_UART2_BASE /* Base address of UART2 */
-#endif
 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
 
 #define CONFIG_SYS_SPI_CLK             clk_get(DAVINCI_SPI1_CLKID)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_SPI_BASE            DAVINCI_SPI1_BASE
-#endif
 
 #ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8000
 #define CONFIG_SYS_SPI_U_BOOT_SIZE     0x40000
 #endif
 
@@ -147,7 +129,6 @@
 #define CONFIG_ENV_SIZE                        (128 << 10)
 #define CONFIG_ENV_SECT_SIZE   (128 << 10)
 #endif
-#define        CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define        CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_CS             3
@@ -182,6 +163,10 @@
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_LOAD
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_NAND_SELF_INIT
+#endif
 #endif
 
 /*
@@ -196,7 +181,7 @@
 #ifdef CONFIG_USE_NOR
 #define CONFIG_SYS_MAX_FLASH_BANKS     1 /* max number of flash banks */
 #define CONFIG_SYS_FLASH_SECT_SZ       (128 << 10) /* 128KB */
-#define CONFIG_ENV_OFFSET              (CONFIG_SYS_FLASH_SECT_SZ * 3)
+#define CONFIG_ENV_OFFSET              (SZ_1M)
 #define CONFIG_ENV_SIZE                        (10 << 10) /* 10KB */
 #define CONFIG_SYS_FLASH_BASE          DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 #define PHYS_FLASH_SIZE                        (8 << 20) /* Flash size 8MB */
@@ -223,7 +208,6 @@
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 #define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_MX_CYCLIC
 
 /*
  * Linux Information
@@ -267,6 +251,10 @@
 #define CONFIG_ENV_SIZE                (16 << 10)
 #endif
 
+/* USB Configs */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     15
+
 #ifndef CONFIG_DIRECT_NOR_BOOT
 /* defines for SPL */
 #define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE - \