#define MC_ASR_VAL 0x00000000
#define MC_AASR_VAL 0x00000000
#define EBI_CFGR_VAL 0x00000000
-#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
+#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
/* clocks */
#define PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */
/* #define CONFIG_ENV_OVERWRITE 1 */
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
-#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_PING
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-#undef CONFIG_CMD_LOADS
-
+#ifdef NAND_SUPPORT_HAS_BEEN_FIXED /* NAND support is broken / unimplemented */
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
+#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0)
#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0)
#define NAND_CTL_CLRCLE(nandptr)
#define NAND_CTL_SETCLE(nandptr)
+#endif /* NAND_SUPPORT_HAS_BEEN_FIXED */
+
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
#define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */
#undef CONFIG_HAS_DATAFLASH
#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS 0
-#define CFG_MAX_DATAFLASH_PAGES 16384
+#define CFG_MAX_DATAFLASH_BANKS 0
+#define CFG_MAX_DATAFLASH_PAGES 16384
#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
#define CFG_FLASH_BASE PHYS_FLASH_1
#define CFG_FLASH_CFI 1 /* flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
+#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
#define CFG_FLASH_EMPTY_INFO
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#define CFG_MAX_FLASH_BANKS 1 /* max # of memory banks */
#define CFG_LOAD_ADDR 0x21000000 /* default load address */
-#define CFG_BAUDRATE_TABLE {115200, 57600, 38400, 19200, 9600 }
+#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#ifndef __ASSEMBLY__
-/*-----------------------------------------------------------------------
- * Board specific extension for bd_info
- *
- * This structure is embedded in the global bd_info (bd_t) structure
- * and can be used by the board specific code (eg board/...)
- */
-
-struct bd_info_ext {
- /* helper variable for board environment handling
- *
- * env_crc_valid == 0 => uninitialised
- * env_crc_valid > 0 => environment crc in flash is valid
- * env_crc_valid < 0 => environment crc in flash is invalid
- */
- int env_crc_valid;
-};
-#endif
-
#define CFG_HZ 1000
#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
+ /* AT91C_TC_TIMER_DIV1_CLOCK */
#define CONFIG_STACKSIZE (32*1024) /* regular stack */