#define CONFIG_INITRD_TAG 1
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CFG_USE_MAIN_OSCILLATOR 1
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
/* flash */
-#define MC_PUIA_VAL 0x00000000
-#define MC_PUP_VAL 0x00000000
-#define MC_PUER_VAL 0x00000000
-#define MC_ASR_VAL 0x00000000
-#define MC_AASR_VAL 0x00000000
-#define EBI_CFGR_VAL 0x00000000
-#define SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
+#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
+#define CONFIG_SYS_MC_PUP_VAL 0x00000000
+#define CONFIG_SYS_MC_PUER_VAL 0x00000000
+#define CONFIG_SYS_MC_ASR_VAL 0x00000000
+#define CONFIG_SYS_MC_AASR_VAL 0x00000000
+#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
+#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
/* clocks */
-#define PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */
-#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
+#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */
+#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
+#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
/* sdram */
-#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define PIOC_BSR_VAL 0x00000000
-#define PIOC_PDR_VAL 0xFFFF0000
-#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
-#define SDRC_CR_VAL 0x3399c1d4 /* set up the SDRAM */
-#define SDRAM 0x20000000 /* address of the SDRAM */
-#define SDRAM1 0x20000080 /* address of the SDRAM */
-#define SDRAM_VAL 0x00000000 /* value written to SDRAM */
-#define SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define SDRC_MR_VAL1 0x00000004 /* refresh */
-#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
+#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
+#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
+#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
+#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
+#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
+#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
+#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
+#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/*
* Size of malloc() pool
*/
-#define CFG_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CONFIG_BAUDRATE 9600
#define CONFIG_HARD_I2C
#ifdef CONFIG_HARD_I2C
-#define CFG_I2C_SPEED 0 /* not used */
-#define CFG_I2C_SLAVE 0 /* not used */
+#define CONFIG_SYS_I2C_SPEED 0 /* not used */
+#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
-#define CFG_I2C_RTC_ADDR 0x32
-#define CFG_I2C_EEPROM_ADDR 0x50
-#define CFG_I2C_EEPROM_ADDR_LEN 1
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW
+#define CONFIG_SYS_I2C_RTC_ADDR 0x32
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
#else
#define CONFIG_TIMESTAMP
#endif
/* still about 20 kB free with this defined */
-#define CFG_LONGHELP
+#define CONFIG_SYS_LONGHELP
#define CONFIG_BOOTDELAY 1
#endif
-#define CFG_LONGHELP
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SYS_LONGHELP
#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
#define PHYS_SDRAM 0x20000000
#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
-#define CFG_MEMTEST_START PHYS_SDRAM
-#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
#define CONFIG_DRIVER_ETHER
#define CONFIG_NET_RETRY_COUNT 20
#define CONFIG_AT91C_USE_RMII
-#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS 2
-#define CFG_MAX_DATAFLASH_PAGES 16384
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
+#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
#define PHYS_FLASH_1 0x10000000
#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CFG_FLASH_BASE PHYS_FLASH_1
-#define CFG_MONITOR_BASE CFG_FLASH_BASE
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MAX_FLASH_SECT 256
-#define CFG_FLASH_ERASE_TOUT (11 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT ( 2 * CFG_HZ) /* Timeout for Flash Write */
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_FLASH_ERASE_TOUT (11 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT ( 2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
#define CONFIG_ENV_SIZE (16 << 10) /* Use only 16 kB */
-#define CFG_LOAD_ADDR 0x21000000 /* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_MAXARGS 32 /* max number of command args */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CFG_HZ 1000
-#define CFG_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
/* AT91C_TC_TIMER_DIV1_CLOCK */
#define CONFIG_STACKSIZE (32*1024) /* regular stack */