ARM: Add support for jadecpu board based on MB86R01 SoC

[oweals/u-boot.git] / include / configs / bfin_adi_common.h

diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 0fbd8f4980be5cae2f2bcb13cf3187fab3d68609..44762689ceb9d20cda68cf5172abea9676c1900c 100644 (file)
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -45,7 +45,7 @@
 #  define CONFIG_CMD_USB_STORAGE
 #  define CONFIG_DOS_PARTITION
 # endif
-# ifdef CONFIG_NAND_PLAT
+# if defined(CONFIG_NAND_PLAT) || defined(CONFIG_DRIVER_NAND_BFIN)
 #  define CONFIG_CMD_NAND
 # endif
 # ifdef CONFIG_POST
@@ -68,6 +68,7 @@
 # endif
 # if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 #  define CONFIG_CMD_I2C
+#  define CONFIG_SOFT_I2C_READ_REPEATED_START
 # endif
 # ifdef CONFIG_SYS_NO_FLASH
 #  undef CONFIG_CMD_FLASH
@@ -75,11 +76,16 @@
 # else
 #  define CONFIG_CMD_JFFS2
 # endif
+# ifdef CONFIG_CMD_JFFS2
+#  define CONFIG_JFFS2_SUMMARY
+# endif
 # define CONFIG_CMD_BOOTLDR
 # define CONFIG_CMD_CACHE
 # define CONFIG_CMD_CPLBINFO
 # define CONFIG_CMD_ELF
 # define CONFIG_ELF_SIMPLE_LOAD
+# define CONFIG_CMD_GPIO
+# define CONFIG_CMD_KGDB
 # define CONFIG_CMD_REGINFO
 # define CONFIG_CMD_STRINGS
 # if defined(__ADSPBF51x__) || defined(__ADSPBF52x__) || defined(__ADSPBF54x__)
@@ -96,6 +102,7 @@
 #define CONFIG_AUTO_COMPLETE   1
 #define CONFIG_LOADS_ECHO      1
 #define CONFIG_JTAG_CONSOLE
+#define CONFIG_SILENT_CONSOLE
 #ifndef CONFIG_BAUDRATE
 # define CONFIG_BAUDRATE       57600
 #endif
@@ -127,6 +134,9 @@
 #ifndef CONFIG_BOOTARGS_ROOT
 # define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
 #endif
+#ifndef FLASHBOOT_ENV_SETTINGS
+# define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20100000\0"
+#endif
 #define CONFIG_BOOTARGS        \
        "root=" CONFIG_BOOTARGS_ROOT " " \
        "clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
@@ -174,7 +184,19 @@
                "erase 0x20000000 +$(filesize);" \
                "cp.b $(loadaddr) 0x20000000 $(filesize)"
 # endif
+# ifdef CONFIG_NETCONSOLE
+#  define NETCONSOLE_ENV \
+       "nc=" \
+               "set ncip ${serverip};" \
+               "set stdin nc;" \
+               "set stdout nc" \
+               "\0"
+# else
+#  define NETCONSOLE_ENV
+# endif
 # define NETWORK_ENV_SETTINGS \
+       NETCONSOLE_ENV \
+       \
        "ubootfile=" UBOOT_ENV_FILE "\0" \
        "update=" \
                "tftp $(loadaddr) $(ubootfile);" \
@@ -211,7 +233,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
        NAND_ENV_SETTINGS \
        NETWORK_ENV_SETTINGS \
-       "flashboot=bootm 0x20100000\0"
+       FLASHBOOT_ENV_SETTINGS
 
 /*
  * Network Settings
@@ -227,12 +249,26 @@
 #   define CONFIG_SYS_AUTOLOAD "no"
 #  endif
 # endif
+# define CONFIG_IP_DEFRAG
 # define CONFIG_NET_RETRY_COUNT 20
 #endif
 
+/*
+ * I2C Settings
+ */
+#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+# ifndef CONFIG_SYS_I2C_SPEED
+#  define CONFIG_SYS_I2C_SPEED 50000
+# endif
+# ifndef CONFIG_SYS_I2C_SLAVE
+#  define CONFIG_SYS_I2C_SLAVE 0
+# endif
+#endif
+
 /*
  * Misc Settings
  */
+#define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */
 #define CONFIG_LZMA
 
 #endif