new at91_emac network driver (NET_MULTI api)

[oweals/u-boot.git] / include / configs / bf537-stamp.h

diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 98300db7b52b826c6dbcf32ba5ccaac6631a08b8..de2add7595c262cc5b3b3a7849d84d256574cc0b 100644 (file)
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -113,7 +113,7 @@
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
 #else
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
@@ -145,7 +145,7 @@
  * SPI_MMC Settings
  */
 #define CONFIG_MMC
-#define CONFIG_BFIN_SPI_MMC
+#define CONFIG_SPI_MMC
 
 
 /*
@@ -178,9 +178,28 @@
 /*
  * CF-CARD IDE-HDD Support
  */
-/* #define CONFIG_BFIN_TRUE_IDE */     /* Add CF flash card support */
-/* #define CONFIG_BFIN_CF_IDE */       /* Add CF flash card support */
-/* #define CONFIG_BFIN_HDD_IDE */      /* Add IDE Disk Drive (HDD) support */
+
+/*
+ * Add CF flash card support in TRUE-IDE Mode (CF-IDE-NAND Card)
+ * Strange address mapping Blackfin A13 connects to CF_A0
+ */
+
+/* #define CONFIG_BFIN_TRUE_IDE */
+
+/*
+ * Add CF flash card support in Common Memory Mode (CF-IDE-NAND Card)
+ * This should be the preferred mode
+ */
+
+/* #define CONFIG_BFIN_CF_IDE */
+
+/*
+ * Add IDE Disk Drive (HDD) support
+ * See example interface here:
+ * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:drivers:ide-blackfin
+ */
+
+/* #define CONFIG_BFIN_HDD_IDE */
 
 #if defined(CONFIG_BFIN_CF_IDE) || \
     defined(CONFIG_BFIN_HDD_IDE) || \
@@ -218,7 +237,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET     0x0020  /* data I/O */
 #define CONFIG_SYS_ATA_REG_OFFSET      0x0020  /* normal register accesses */
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x001C  /* alternate registers */
-#define CONFIG_SYS_ATA_STRIDE          2       /* CF.A0 --> Blackfin.Ax */
+#define CONFIG_SYS_ATA_STRIDE          2       /* CF.A0 --> Blackfin.A13 */
 
 #elif defined(CONFIG_BFIN_CF_IDE)
 #define CONFIG_SYS_ATA_BASE_ADDR       0x20211800
@@ -226,7 +245,7 @@
 #define CONFIG_SYS_ATA_DATA_OFFSET     0x0000  /* data I/O */
 #define CONFIG_SYS_ATA_REG_OFFSET      0x0000  /* normal register accesses */
 #define CONFIG_SYS_ATA_ALT_OFFSET      0x000E  /* alternate registers */
-#define CONFIG_SYS_ATA_STRIDE          1       /* CF.A0 --> Blackfin.Ax */
+#define CONFIG_SYS_ATA_STRIDE          1       /* CF_A0=0, with /CE1 /CE2 odd/even byte selects */
 
 #elif defined(CONFIG_BFIN_HDD_IDE)
 #define CONFIG_SYS_ATA_BASE_ADDR       0x20314000