Merge git://git.denx.de/u-boot-fsl-qoriq

[oweals/u-boot.git] / include / configs / baltos.h

diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 4e07e52a1b2a5fb8afafbc50b5291725c4f5939c..44af4d3deec8b95b5640be84f3c66de95d1eb076 100644 (file)
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -19,8 +19,7 @@
 #include <linux/sizes.h>
 #include <configs/ti_am335x_common.h>
 
-#define MACH_TYPE_TIAM335EVM           3589    /* Until the next sync */
-#define CONFIG_MACH_TYPE               MACH_TYPE_TIAM335EVM
+#define CONFIG_MACH_TYPE               MACH_TYPE_AM335XEVM
 
 /* Clock Defines */
 #define V_OSCK                         24000000  /* Clock output from T2 */
@@ -32,22 +31,12 @@
 /* Always 128 KiB env size */
 #define CONFIG_ENV_SIZE                        (128 << 10)
 
-/* Enhance our eMMC support / experience. */
-#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
-
 /* FIT support */
 #define CONFIG_SYS_BOOTM_LEN         SZ_64M
 
 /* UBI Support */
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_UBIFS
 
 /* I2C configuration */
 #undef CONFIG_SYS_OMAP24_I2C_SPEED
@@ -56,9 +45,7 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x00080000
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
-#define CONFIG_CMD_SPL_WRITE_SIZE      0x2000
 #endif
 #define NANDARGS \
        "mtdids=" MTDIDS_DEFAULT "\0" \
@@ -235,9 +222,7 @@
 #define CONFIG_SYS_NS16550_COM4                0x481a6000      /* UART3 */
 #define CONFIG_SYS_NS16550_COM5                0x481a8000      /* UART4 */
 #define CONFIG_SYS_NS16550_COM6                0x481aa000      /* UART5 */
-#define CONFIG_BAUDRATE                        115200
 
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
@@ -256,8 +241,6 @@
 /* General network SPL, both CPSW and USB gadget RNDIS */
 #define CONFIG_SPL_NET_VCI_STRING      "AM335x U-Boot SPL"*/
 
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
-
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_NAND_OMAP_GPMC_PREFETCH
@@ -293,7 +276,6 @@
  * and DFU.
  */
 #define CONFIG_USB_MUSB_DSPS
-#define CONFIG_ARCH_MISC_INIT
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
@@ -301,25 +283,15 @@
 #define CONFIG_AM335X_USB1
 #define CONFIG_AM335X_USB1_MODE MUSB_OTG
 
-#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#define CONFIG_USBNET_HOST_ADDR        "de:ad:be:af:00:00"
-#endif /* CONFIG_USB_MUSB_GADGET */
-
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)
 /* disable host part of MUSB in SPL */
 /* disable EFI partitions and partition UUID support */
-#undef CONFIG_PARTITION_UUIDS
-#undef CONFIG_EFI_PARTITION
 /*
  * Disable CPSW SPL support so we fit within the 101KiB limit.
  */
 #endif
 
 /* Network. */
-#define CONFIG_PHY_GIGE
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ADDR                        0
 #define CONFIG_PHY_SMSC
 #define CONFIG_MII
@@ -327,7 +299,6 @@
 
 /* NAND support */
 #ifdef CONFIG_NAND
-#define CONFIG_CMD_NAND
 #define GPMC_NAND_ECC_LP_x8_LAYOUT     1
 #if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT)
 #define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
@@ -337,7 +308,6 @@
                                        "128k(SPL.backup3)," \
                                        "1920k(u-boot)," \
                                        "-(UBI)"
-#define CONFIG_ENV_IS_NOWHERE
 #endif
 #endif