apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / ax25-ae350.h

diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h
index a5948c433342d50e39754afc125c1ef6742ed8e8..a4037f33dd251d797edf4eae560a15497cc6116c 100644 (file)
--- a/include/configs/ax25-ae350.h
+++ b/include/configs/ax25-ae350.h
@@ -11,7 +11,6 @@
  * CPU and Board Configuration Options
  */
 #define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_SERVERIP
 
 /*
  * Miscellaneous configurable options
@@ -41,12 +40,11 @@
 #define CONFIG_SYS_MALLOC_LEN   (512 << 10)
 
 /* DT blob (fdt) address */
-#define CONFIG_SYS_FDT_BASE            0x000f0000
+#define CONFIG_SYS_FDT_BASE            0x800f0000
 
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS   2
 #define PHYS_SDRAM_0   0x00000000              /* SDRAM Bank #1 */
 #define PHYS_SDRAM_1   \
        (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)      /* SDRAM Bank #2 */
@@ -79,19 +77,46 @@
 #define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM_0
 #define CONFIG_SYS_MEMTEST_END         (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)
 
+/*
+ * FLASH and environment organization
+ */
+
+/* use CFI framework */
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
+
+/* support JEDEC */
+#ifdef CONFIG_CFI_FLASH
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT      1
+#endif/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
+#define PHYS_FLASH_1                   0x88000000      /* BANK 0 */
+#define CONFIG_SYS_FLASH_BASE          PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BANKS_LIST    { PHYS_FLASH_1, }
+#define CONFIG_SYS_MONITOR_BASE                PHYS_FLASH_1
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT    120000  /* TO for Flash Erase (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* TO for Flash Write (ms) */
+
+/* max number of memory banks */
+/*
+ * There are 4 banks supported for this Controller,
+ * but we have only 1 bank connected to flash on board
+*/
+#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#endif
+#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
+
+/* max number of sectors on one chip */
+#define CONFIG_FLASH_SECTOR_SIZE       (0x10000*2)
+#define CONFIG_SYS_MAX_FLASH_SECT      512
+
 /* environments */
-#define CONFIG_ENV_SPI_BUS             0
-#define CONFIG_ENV_SPI_CS              0
-#define CONFIG_ENV_SPI_MAX_HZ          50000000
-#define CONFIG_ENV_SPI_MODE            0
 #define CONFIG_ENV_SECT_SIZE           0x1000
 #define CONFIG_ENV_OVERWRITE
 
 /* SPI FLASH */
-#define CONFIG_SF_DEFAULT_BUS          0
-#define CONFIG_SF_DEFAULT_CS           0
-#define CONFIG_SF_DEFAULT_SPEED                1000000
-#define CONFIG_SF_DEFAULT_MODE         0
 
 /*
  * For booting Linux, the board info and command line data