#ifndef __CONFIG_H
#define __CONFIG_H
-#include <asm/arch/memory-map.h>
+#include <asm/arch/hardware.h>
-#define CONFIG_AVR32 1
-#define CONFIG_AT32AP 1
-#define CONFIG_AT32AP7000 1
-#define CONFIG_ATNGW100 1
+#define CONFIG_AVR32
+#define CONFIG_AT32AP
+#define CONFIG_AT32AP7000
+#define CONFIG_ATNGW100
#define CONFIG_SYS_HZ 1000
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
* and the PBA bus to run at 1/4 the PLL frequency.
*/
-#define CONFIG_PLL 1
-#define CONFIG_SYS_POWER_MANAGER 1
+#define CONFIG_PLL
+#define CONFIG_SYS_POWER_MANAGER
#define CONFIG_SYS_OSC0_HZ 20000000
#define CONFIG_SYS_PLL0_DIV 1
#define CONFIG_SYS_PLL0_MUL 7
*/
#define CONFIG_SYS_PLL0_OPT 0x04
-#define CONFIG_USART1 1
-
+#define CONFIG_USART_BASE ATMEL_BASE_USART1
+#define CONFIG_USART_ID 1
/* User serviceable stuff */
-#define CONFIG_DOS_PARTITION 1
+#define CONFIG_DOS_PARTITION
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
#define CONFIG_STACKSIZE (2048)
* data on the serial line may interrupt the boot sequence.
*/
#define CONFIG_BOOTDELAY 1
-#define CONFIG_AUTOBOOT 1
-#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT
+#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT \
"Press SPACE to abort autoboot in %d seconds\n", bootdelay
#define CONFIG_AUTOBOOT_DELAY_STR "d"
* should be generated and assigned to the environment variables
* "ethaddr" and "eth1addr". This is normally done during production.
*/
-#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
-#define CONFIG_NET_MULTI 1
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
/*
* BOOTP/DHCP options
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_DOS_PARTITION 1
-
/*
* Command line configuration.
*/
#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_XIMG
-#define CONFIG_ATMEL_USART 1
-#define CONFIG_MACB 1
-#define CONFIG_PORTMUX_PIO 1
+#define CONFIG_ATMEL_USART
+#define CONFIG_MACB
+#define CONFIG_PORTMUX_PIO
#define CONFIG_SYS_NR_PIOS 5
-#define CONFIG_SYS_HSDRAMC 1
-#define CONFIG_MMC 1
-#define CONFIG_ATMEL_MCI 1
-#define CONFIG_ATMEL_SPI 1
+#define CONFIG_SYS_HSDRAMC
+#define CONFIG_MMC
+#define CONFIG_ATMEL_MCI
+#define CONFIG_ATMEL_SPI
-#define CONFIG_SPI_FLASH 1
-#define CONFIG_SPI_FLASH_ATMEL 1
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SYS_DCACHE_LINESZ 32
#define CONFIG_SYS_ICACHE_LINESZ 32
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_BASE 0x00000000
#define CONFIG_SYS_FLASH_SIZE 0x800000
#define CONFIG_SYS_MAX_FLASH_SECT 135
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_TEXT_BASE 0x00000000
#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE
#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE
#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE
-#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SIZE 65536
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MEMTEST_START EBI_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000)