Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

[oweals/u-boot.git] / include / configs / at91sam9x5ek.h

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 6d8b71dcedadec2a4fd420b11709544b55786b99..2068e0de04abb4181d9dc1ba521c2defda2166d9 100644 (file)
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -68,10 +68,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
@@ -97,7 +93,6 @@
 /* DataFlash */
 #ifdef CONFIG_CMD_SF
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SF_DEFAULT_SPEED                30000000
 #endif
@@ -228,11 +223,8 @@
 
 #define CONFIG_BAUDRATE                115200
 
-#define CONFIG_SYS_PROMPT      "U-Boot> "
 #define CONFIG_SYS_CBSIZE      256
 #define CONFIG_SYS_MAXARGS     16
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
-                                       + 16)
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
@@ -243,4 +235,59 @@
  */
 #define CONFIG_SYS_MALLOC_LEN          (512 * 1024 + 0x1000)
 
+/* SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE           0x300000
+#define CONFIG_SPL_MAX_SIZE            0x6000
+#define CONFIG_SPL_STACK               0x308000
+
+#define CONFIG_SPL_BSS_START_ADDR      0x20000000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
+#define CONFIG_SYS_SPL_MALLOC_START    0x20080000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_MONITOR_LEN         (512 << 10)
+
+#define CONFIG_SYS_MASTER_CLOCK                132096000
+#define CONFIG_SYS_AT91_PLLA           0x20c73f03
+#define CONFIG_SYS_MCKR                        0x1301
+#define CONFIG_SYS_MCKR_CSS            0x1302
+
+#ifdef CONFIG_SYS_USE_MMC
+#define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x400
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+
+#elif CONFIG_SYS_USE_NANDFLASH
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+#define CONFIG_SPL_NAND_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
+#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
+
+#elif CONFIG_SYS_USE_SPIFLASH
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400
+
+#endif
+
 #endif