xpedite1k: Remove CONFIG_SYS_DRAM_TEST support

[oweals/u-boot.git] / include / configs / at91sam9260ek.h

diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index 1fae3a3b820400d12c136cd7506be7452cb11779..6cee59368ceb194c55a9ff0c56463c86f7f2037f 100644 (file)
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -29,25 +29,17 @@
 
 /* ARM asynchronous clock */
 #define AT91_MAIN_CLOCK                18432000        /* 18.432 MHz crystal */
-#define CONFIG_SYS_AT91_PLLB   0x107c3e18      /* PLLB settings for USB */
-#define CONFIG_SYS_HZ          1000000         /* 1us resolution */
-
-#define AT91_SLOW_CLOCK                32768   /* slow clock */
+#define CONFIG_SYS_HZ          1000
 
 #define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core    */
 
 #ifdef CONFIG_AT91SAM9G20EK
-#define AT91_CPU_NAME          "AT91SAM9G20"
-#define AT91_MASTER_CLOCK      132000000       /* peripheral */
-#define AT91_CPU_CLOCK         396000000       /* cpu */
 #define CONFIG_AT91SAM9G20     1       /* It's an Atmel AT91SAM9G20 SoC*/
 #else
-#define AT91_CPU_NAME          "AT91SAM9260"
-#define AT91_MASTER_CLOCK      100000000       /* peripheral */
-#define AT91_CPU_CLOCK         200000000       /* cpu */
 #define CONFIG_AT91SAM9260     1       /* It's an Atmel AT91SAM9260 SoC*/
 #endif
 
+#define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff  */
 
 #define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
@@ -86,11 +78,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING                1
 #define CONFIG_CMD_DHCP                1
@@ -103,6 +95,7 @@
 #define PHYS_SDRAM_SIZE                        0x04000000      /* 64 megs */
 
 /* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH           1
 #define CONFIG_SYS_SPI_WRITE_TOUT              (5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS         2
@@ -129,6 +122,8 @@
 #define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC13
+
+#define CONFIG_SYS_64BIT_VSPRINTF              /* needed for nand_util.c */
 #endif
 
 /* NOR flash - no real flash on this board */
@@ -142,6 +137,7 @@
 #define CONFIG_RESET_PHY_R             1
 
 /* USB */
+#define CONFIG_USB_ATMEL
 #define CONFIG_USB_OHCI_NEW            1
 #define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
@@ -211,7 +207,6 @@
 #define CONFIG_SYS_LONGHELP            1
 #define CONFIG_CMDLINE_EDITING 1
 
-#define ROUND(A, B)            (((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */