configs: ls1012a: Enable CONFIG_SPI_FLASH_SPANSION in defconfigs

[oweals/u-boot.git] / include / configs / at91-sama5_common.h

diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h
index 108842f9565f42232c306436d6c090f5605791a6..6e9793ab81f57ab1b14a0ebb7c313135d8ed23c4 100644 (file)
--- a/include/configs/at91-sama5_common.h
+++ b/include/configs/at91-sama5_common.h
@@ -1,59 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common part of configuration settings for the AT91 SAMA5 board.
  *
  * Copyright (C) 2015 Atmel Corporation
  *                   Josh Wu <josh.wu@atmel.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __AT91_SAMA5_COMMON_H
 #define __AT91_SAMA5_COMMON_H
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE           0x26f00000
+#include <linux/kconfig.h>
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */
 
-#define CONFIG_ARCH_CPU_INIT
-
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
 
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-
 /* general purpose I/O */
-#ifndef CONFIG_DM_GPIO
+#if !CONFIG_IS_ENABLED(DM_GPIO)
 #define CONFIG_AT91_GPIO
 #endif
 
-
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
 
-#ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_SD_BOOT
 
 #ifdef CONFIG_ENV_IS_IN_MMC
-/* Use raw reserved sectors to save environment */
-#define CONFIG_ENV_OFFSET              0x2000
-#define CONFIG_ENV_SIZE                        0x1000
 #define CONFIG_SYS_MMC_ENV_DEV         0
-#else
-/* u-boot env in sd/mmc card */
-#define CONFIG_ENV_SIZE                0x4000
 #endif
 
 #define CONFIG_BOOTCOMMAND     "if test ! -n ${dtb_name}; then "       \
@@ -65,33 +48,26 @@
 
 #else
 
-#ifdef CONFIG_SYS_USE_NANDFLASH
+#ifdef CONFIG_NAND_BOOT
 /* u-boot env in nand flash */
-#define CONFIG_ENV_OFFSET              0xc0000
-#define CONFIG_ENV_OFFSET_REDUND       0x100000
-#define CONFIG_ENV_SIZE                        0x20000
 #define CONFIG_BOOTCOMMAND             "nand read 0x21000000 0x180000 0x80000;"        \
                                        "nand read 0x22000000 0x200000 0x600000;"       \
                                        "bootz 0x22000000 - 0x21000000"
-#elif CONFIG_SYS_USE_SERIALFLASH
+#elif CONFIG_SPI_BOOT
 /* u-boot env in serial flash, by default is bus 0 and cs 0 */
-#define CONFIG_ENV_OFFSET              0x6000
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_SECT_SIZE           0x1000
 #define CONFIG_BOOTCOMMAND             "sf probe 0; "                          \
                                        "sf read 0x21000000 0x60000 0xc000; "   \
                                        "sf read 0x22000000 0x6c000 0x394000; " \
                                        "bootz 0x22000000 - 0x21000000"
+#elif CONFIG_QSPI_BOOT
+#define CONFIG_BOOTCOMMAND             "sf probe 0; "                                  \
+                                       "sf read 0x21000000 0x180000 0x80000; "         \
+                                       "sf read 0x22000000 0x200000 0x600000; "        \
+                                       "bootz 0x22000000 - 0x21000000"
 #endif
 
 #endif
 
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)