Exynos5: Config: Increase SPL footprint for Exynos5420

[oweals/u-boot.git] / include / configs / arndale.h

diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index ed44a0424c9ebc67f381528cc2ed5b8cd0d6939e..370db821a85d58e98057351186b7496416b9af39 100644 (file)
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -22,8 +22,6 @@
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
-/* Enable fdt support for Exynos5250 */
-#define CONFIG_ARCH_DEVICE_TREE                exynos5250
 #define CONFIG_OF_CONTROL
 #define CONFIG_OF_SEPARATE
 
@@ -85,6 +83,7 @@
 #define CONFIG_DWMMC
 #define CONFIG_EXYNOS_DWMMC
 #define CONFIG_SUPPORT_EMMC_BOOT
+#define CONFIG_BOUNCE_BUFFER
 
 
 #define CONFIG_BOARD_EARLY_INIT_F
@@ -116,7 +115,12 @@
 #define CONFIG_USB_EHCI_EXYNOS
 #define CONFIG_USB_STORAGE
 
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
 /* MMC SPL */
+#define CONFIG_EXYNOS_SPL
 #define CONFIG_SPL
 #define COPY_BL2_FNPTR_ADDR    0x02020030
 
@@ -144,8 +148,6 @@
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
 #define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
-#define CONFIG_SYS_HZ                  1000
-
 #define CONFIG_RD_LVL
 
 #define CONFIG_NR_DRAM_BANKS   8
@@ -200,10 +202,6 @@
 #define BL2_START_OFFSET       (CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT    (CONFIG_BL2_SIZE/512)
 
-#define CONFIG_SPI_BOOTING
-#define EXYNOS_COPY_SPI_FNPTR_ADDR     0x02020058
-#define SPI_FLASH_UBOOT_POS            (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_PART
@@ -216,22 +214,23 @@
 
 /* I2C */
 #define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_SPEED   100000          /* 100 Kbps */
-#define CONFIG_DRIVER_S3C24X0_I2C
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
+#define CONFIG_SYS_I2C_S3C24X0
 #define CONFIG_MAX_I2C_NUM     8
-#define CONFIG_SYS_I2C_SLAVE    0x0
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
 #define CONFIG_I2C_EDID
 
 /* PMIC */
 #define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
 
 #define CONFIG_DEFAULT_DEVICE_TREE     exynos5250-arndale
 
+#define CONFIG_PREBOOT
+
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_SMC911X