#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
- "board_type=aristainetos2_7@1\0" \
- "nor_bootdelay=-2\0" \
- "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
- "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
- "-(rescue-system);gpmi-nand:-(ubi)\0" \
- "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0\0" \
- "ubiargs=setenv bootargs console=${console},${baudrate} " \
- "ubi.mtd=0,4096 root=ubi0:rootfs rootfstype=ubifs\0 " \
- "ubifs_load_fit=sf probe;ubi part ubi 4096;ubifsmount ubi:rootfs;" \
- "ubifsload ${fit_addr_r} /boot/system.itb; " \
- "imi ${fit_addr_r}\0 "
-
/* Framebuffer */
#define CONFIG_SYS_LDB_CLOCK 28341000
#define CONFIG_LG4573
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
+#ifdef CONFIG_IMX_HAB
+#define HAB_EXTRA_SETTINGS \
+ "hab_check_addr=" \
+ "if hab_auth_img ${check_addr} ${filesize} ; then " \
+ "true;" \
+ "else " \
+ "echo \"HAB checks ${hab_check_filetype} " \
+ "failed!\"; " \
+ "false; " \
+ "fi;\0" \
+ "hab_check_file_fit=" \
+ "if env exists enable_hab_check && test " \
+ "${enable_hab_check} -eq 1 ; then " \
+ "setenv hab_check_filetype \"FIT file on SD card " \
+ "or eMMC\";" \
+ "env set check_addr ${fit_addr_r};" \
+ "run hab_check_addr;" \
+ "else " \
+ "true; "\
+ "fi;\0" \
+ "hab_check_file_bootscript=" \
+ "if env exists enable_hab_check && test " \
+ "${enable_hab_check} -eq 1 ; then " \
+ "setenv hab_check_filetype \"Bootscript file\";" \
+ "env set check_addr ${loadaddr};" \
+ "run hab_check_addr;" \
+ "else " \
+ "true; "\
+ "fi;\0" \
+ "hab_check_flash_fit=" \
+ "if env exists enable_hab_check && test " \
+ "${enable_hab_check} -eq 1 ; then " \
+ "setenv hab_check_filetype \"FIT files on flash\";" \
+ "env set check_addr ${fit_addr_r};" \
+ "run hab_check_addr;" \
+ "else " \
+ "true; "\
+ "fi;\0" \
+ "enable_hab_check=1\0"
+#else
+#define HAB_EXTRA_SETTINGS \
+ "hab_check_file_fit=echo HAB check FIT file always returns " \
+ "true;true\0" \
+ "hab_check_flash_fit=echo HAB check flash FIT always returns " \
+ "true;true\0" \
+ "hab_check_file_bootscript=echo HAB check bootscript always " \
+ "returns true;true\0" \
+ "enable_hab_check=0\0"
+#endif
+
+#if (CONFIG_SYS_BOARD_VERSION == 3)
+#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
+ "dead=led led_red on\0" \
+ "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
+ "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
+ "-(ubi-nor);gpmi-nand:-(ubi)\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
+ "mainboot=echo Booting from SD-card ...; " \
+ "run mainargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "${fit_file}\0" \
+ "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "${fit_addr_r} ${rescue_fit_file}\0"
+#elif (CONFIG_SYS_BOARD_VERSION == 4)
+#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
+ "dead=led led_red on;led led_red2 on;\0" \
+ "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \
+ "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
+ "-(ubi-nor);gpmi-nand:-(ubi)\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
+ "mainboot=echo Booting from SD-card ...; " \
+ "run mainargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "${fit_file}\0" \
+ "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "${fit_addr_r} ${rescue_fit_file}\0"
+#elif (CONFIG_SYS_BOARD_VERSION == 5)
+#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
+ "emmcpart=1\0" \
+ "emmc_rescue_part=3\0" \
+ "emmcdev=1\0" \
+ "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \
+ "dead=led led_red on\0" \
+ "mtdids=nor0=spi0.0\0" \
+ "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \
+ "-(ubi-nor)\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} mmcpart=${mmcpart} " \
+ "emmcpart=${emmcpart}\0" \
+ "mainboot=echo Booting from eMMC ...; " \
+ "run mainargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${emmcroot} rootfstype=ext4\0 " \
+ "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \
+ "${fit_file}; " \
+ "imi ${fit_addr_r}\0 " \
+ "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \
+ "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0"
+#else
+#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \
+ "dead=led led_red on\0" \
+ "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \
+ "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \
+ "-(ubi-nor);gpmi-nand:-(ubi)\0" \
+ "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \
+ "bootmode=${bootmode} mmcpart=${mmcpart}\0" \
+ "mainboot=echo Booting from SD-card ...; " \
+ "run mainargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "bootm ${fit_addr_r}\0" \
+ "mainargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "${fit_file}\0" \
+ "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "${fit_addr_r} ${rescue_fit_file}\0"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"disable_giga=yes\0" \
+ "usb_pgood_delay=2000\0" \
+ "nor_bootdelay=-2\0" \
"script=u-boot.scr\0" \
"fit_file=/boot/system.itb\0" \
+ "rescue_fit_file=/boot/rescue.itb\0" \
"loadaddr=0x12000000\0" \
"fit_addr_r=0x14000000\0" \
"uboot=/boot/u-boot.imx\0" \
"uboot_sz=d0000\0" \
- "rescue_sys_addr=f0000\0" \
- "rescue_sys_length=f10000\0" \
"panel=lb07wv8\0" \
"splashpos=m,m\0" \
"console=" CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \
- "default ${board_type}\0" \
+ "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \
"get_env=mw ${loadaddr} 0 0x20000;" \
"mmc rescan;" \
- "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \
"env import -t ${loadaddr}\0" \
- "default_env=mw ${loadaddr} 0 0x20000;" \
- "env export -t ${loadaddr} serial# ethaddr eth1addr " \
- "board_type panel;" \
+ "default_env=gpio set wp_spi_nor.gpio-hog;" \
+ "sf probe;" \
+ "sf protect unlock 0 0x1000000;" \
+ "mw ${loadaddr} 0 0x20000;" \
+ "env export -t ${loadaddr} serial# ethaddr " \
+ "board_type panel addmisc addmiscM addmiscC addmiscD;" \
"env default -a;" \
"env import -t ${loadaddr}\0" \
"loadbootscript=" \
- "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "${script};\0" \
+ "loadbootscriptUSB=" \
+ "ext4load usb 0 ${loadaddr} ${script};\0" \
+ "loadbootscriptUSBf=" \
+ "fatload usb 0 ${loadaddr} ${script};\0" \
+ "bootscriptUSB=echo Running bootscript from usb-stick ...; " \
+ "source\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"mmcpart=1\0" \
+ "mmcrescuepart=3\0" \
"mmcdev=0\0" \
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"mmcboot=echo Booting from mmc ...; " \
- "run mmcargs addmtd addmisc set_fit_default;" \
+ "run mmcargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
- "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
+ "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \
"${fit_file}\0" \
- "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
+ "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
"${uboot}\0" \
+ "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \
+ "${fit_addr_r} ${rescue_fit_file}\0" \
"mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
"setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \
"setexpr uboot_maxsize ${uboot_sz} - 400;" \
"sf write ${loadaddr} 400 ${filesize};" \
"sf read ${cmp_buf} 400 ${uboot_sz};" \
"cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \
- "ubiboot=echo Booting from ubi ...; " \
- "run ubiargs addmtd addmisc set_fit_default;" \
- "bootm ${fit_addr_r}\0" \
"rescueargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/ram rw\0 " \
- "rescueboot=echo Booting rescue system from NOR ...; " \
- "run rescueargs addmtd addmisc set_fit_default;" \
+ "rescueboot=echo Booting rescue system ...; " \
+ "run rescueargs addmtd addmisc;" \
+ "if test -n ${rescue_reason}; then run rescue_reason;fi;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
+ "if bootm ${fit_addr_r}; then ; " \
+ "else " \
+ "run dead; " \
+ "fi; \0" \
+ "r_reason_syserr=setenv rescue_reason setenv bootargs " \
+ "\\\\${bootargs} " \
+ "rescueReason=18\0 " \
+ "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \
+ "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \
+ "${rescue_fit_file}\0" \
+ "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \
+ "${rescue_fit_file}\0" \
+ "usbroot=/dev/sda1 rootwait rw\0" \
+ "usbboot=echo Booting from usb-stick ...; " \
+ "run usbargs addmtd addmisc;" \
+ "if test -n ${addmiscM}; then run addmiscM;fi;" \
+ "if test -n ${addmiscC}; then run addmiscC;fi;" \
+ "if test -n ${addmiscD}; then run addmiscD;fi;" \
+ "run boot_board_type;" \
"bootm ${fit_addr_r}\0" \
- "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \
- "${rescue_sys_length}; imi ${fit_addr_r}\0" \
- CONFIG_EXTRA_ENV_BOARD_SETTINGS
-
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev};" \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
+ "usbargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${usbroot}\0" \
+ "mmc_rescue_boot=" \
+ "run r_reason_syserr;" \
+ "if run mmc_rescue_load_fit hab_check_file_fit; then " \
+ "run rescueboot; " \
"else " \
- "if run mmc_load_fit; then " \
- "run mmcboot; " \
+ "run dead; " \
+ "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \
+ "fi;\0" \
+ "main_rescue_boot=" \
+ "if run main_load_fit hab_check_flash_fit; then " \
+ "if run mainboot; then ; " \
"else " \
- "if run ubifs_load_fit; then " \
- "run ubiboot; " \
+ "run r_reason_syserr;" \
+ "if run rescue_load_fit hab_check_file_fit;" \
+ "then run rescueboot; " \
"else " \
- "if run rescue_load_fit; then " \
- "run rescueboot; " \
- "else " \
- "echo RESCUE SYSTEM BOOT " \
- "FAILURE;" \
- "fi; " \
+ "run dead; " \
+ "echo RESCUE SYSTEM BOOT FAILURE;" \
"fi; " \
"fi; " \
- "fi; " \
- "else " \
- "if run ubifs_load_fit; then " \
- "run ubiboot; " \
"else " \
- "if run rescue_load_fit; then " \
+ "run r_reason_syserr;" \
+ "if run rescue_load_fit hab_check_file_fit; then " \
"run rescueboot; " \
"else " \
+ "run dead; " \
"echo RESCUE SYSTEM BOOT FAILURE;" \
"fi; " \
+ "fi;\0" \
+ "usb_mmc_rescue_boot=" \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run loadbootscriptUSB " \
+ "hab_check_file_bootscript;" \
+ "then run bootscriptUSB; " \
+ "fi; " \
+ "if run loadbootscriptUSBf " \
+ "hab_check_file_bootscript;" \
+ "then run bootscriptUSB; " \
+ "fi; " \
+ "if run usb_load_fit hab_check_file_fit; then " \
+ "run usbboot; " \
+ "fi; " \
+ "if run usb_load_fitf hab_check_file_fit; then " \
+ "run usbboot; " \
+ "fi; "\
+ "if run usb_load_rescuefit hab_check_file_fit;" \
+ "then run r_reason_syserr rescueboot;" \
+ "fi; " \
+ "if run usb_load_rescuefitf hab_check_file_fit;" \
+ "then run r_reason_syserr rescueboot;" \
+ "fi; " \
+ "run mmc_rescue_boot;" \
+ "fi; "\
+ "run mmc_rescue_boot;\0" \
+ "rescue_xload_boot=" \
+ "run r_reason_syserr;" \
+ "if test ${bootmode} -ne 0 ; then " \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run mmc_rescue_load_fit " \
+ "hab_check_file_fit; then " \
+ "run rescueboot; " \
+ "else " \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run usb_load_rescuefit " \
+ "hab_check_file_fit;"\
+ "then " \
+ "run rescueboot;" \
+ "fi; " \
+ "if run usb_load_rescuefitf "\
+ "hab_check_file_fit;"\
+ "then " \
+ "run rescueboot;" \
+ "fi; " \
+ "fi;" \
+ "fi;" \
+ "run dead; " \
+ "echo RESCUE SYSTEM ON SD OR " \
+ "USB BOOT FAILURE;" \
+ "else " \
+ "usb start;" \
+ "if usb storage; then " \
+ "if run usb_load_rescuefit " \
+ "hab_check_file_fit; then " \
+ "run rescueboot;" \
+ "fi; " \
+ "if run usb_load_rescuefitf " \
+ "hab_check_file_fit; then " \
+ "run rescueboot;" \
+ "fi; " \
+ "fi;" \
+ "run dead; " \
+ "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \
+ "fi; " \
+ "else "\
+ "if run rescue_load_fit hab_check_file_fit; then " \
+ "run rescueboot; " \
+ "else " \
+ "run dead; " \
+ "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \
+ "fi; " \
+ "fi;\0" \
+ "ari_boot=if test ${bootmode} -ne 0 ; then " \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run loadbootscript hab_check_file_bootscript;" \
+ "then run bootscript; " \
+ "fi; " \
+ "if run mmc_load_fit hab_check_file_fit; then " \
+ "if run mmcboot; then ; " \
+ "else " \
+ "run mmc_rescue_boot;" \
+ "fi; " \
+ "else " \
+ "run usb_mmc_rescue_boot;" \
+ "fi; " \
+ "else " \
+ "run usb_mmc_rescue_boot;" \
"fi; " \
- "fi"
+ "else "\
+ "run main_rescue_boot;" \
+ "fi; \0"\
+ HAB_EXTRA_SETTINGS \
+ CONFIG_EXTRA_ENV_BOARD_SETTINGS
#define CONFIG_ARP_TIMEOUT 200UL
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
-#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
projects / oweals / u-boot.git / blobdiff