imx6: aristainetos: disable gigabit support

[oweals/u-boot.git] / include / configs / aristainetos-common.h

diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
index 7360e11ff14dae8ec682ce6f7baceb3be4474ece..9a6c205c72914073265e2b516dd65c571d6265d4 100644 (file)
--- a/include/configs/aristainetos-common.h
+++ b/include/configs/aristainetos-common.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2015
  * (C) Copyright 2014
@@ -7,8 +8,6 @@
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Freescale i.MX6Q SabreSD board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 #ifndef __ARISTAINETOS_COMMON_CONFIG_H
 #define __ARISTAINETOS_COMMON_CONFIG_H
@@ -18,30 +17,17 @@
 #define CONFIG_MACH_TYPE       4501
 #define CONFIG_MMCROOT         "/dev/mmcblk0p1"
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (64 * SZ_1M)
-
-#define CONFIG_MXC_UART
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_FEC_MXC
-#define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_ETHPRIME                        "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         0
 
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL
-
-#define CONFIG_SPI_FLASH_MTD
-#define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_SPEED                20000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
+       "disable_giga=yes\0" \
        "script=u-boot.scr\0" \
        "fit_file=/boot/system.itb\0" \
        "loadaddr=0x12000000\0" \
@@ -138,15 +124,11 @@
 
 #define CONFIG_ARP_TIMEOUT             200UL
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
 #define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x100000)
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
@@ -159,42 +141,22 @@
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-#define CONFIG_ENV_SIZE                        (12 * 1024)
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
-#define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
-#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
-#define CONFIG_ENV_SECT_SIZE           (0x010000)
-#define CONFIG_ENV_OFFSET              (0x0d0000)
-#define CONFIG_ENV_OFFSET_REDUND       (0x0e0000)
 
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           0x7f
 #define CONFIG_SYS_I2C_NOPROBES                { {0, 0x00} }
 
 /* NAND stuff */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
-#define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
-#define CONFIG_APBH_DMA
-#define CONFIG_APBH_DMA_BURST
-#define CONFIG_APBH_DMA_BURST8
 
 /* RTC */
 #define CONFIG_SYS_I2C_RTC_ADDR        0x68
@@ -208,18 +170,8 @@
 #define CONFIG_MXC_USB_FLAGS   0
 
 /* UBI support */
-#define CONFIG_LZO
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_RBTREE
-#define CONFIG_CMD_UBIFS
-
-#define CONFIG_HW_WATCHDOG
-#define CONFIG_IMX_WATCHDOG
 
 /* Framebuffer */
-#define CONFIG_VIDEO_IPUV3
 /* check this console not needed, after test remove it */
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
@@ -227,10 +179,8 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IPUV3_CLK 198000000
 #define CONFIG_IMX_VIDEO_SKIP
 
-#define CONFIG_PWM_IMX
 #define CONFIG_IMX6_PWM_PER_CLK        66000000
 
 #endif /* __ARISTAINETOS_COMMON_CONFIG_H */