82xx, mgcoge: fix compile error

[oweals/u-boot.git] / include / configs / ads5121.h

diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index bb3525f1751822226ab75be0f31b35d5894f4198..8fda3f29fabddb1b0f8af6cfed82e340c6b6d85c 100644 (file)
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -47,6 +47,7 @@
 #define CONFIG_E300            1       /* E300 Family */
 #define CONFIG_MPC512X         1       /* MPC512X family */
 #define CONFIG_FSL_DIU_FB      1       /* FSL DIU */
+#undef CONFIG_FSL_DIU_LOGO_BMP         /* Don't include FSL DIU binary bmp */
 
 /* video */
 #undef CONFIG_VIDEO
@@ -293,6 +294,11 @@
 #define CONFIG_SYS_I2C_NOPROBES        {{0,0x69}}      /* Don't probe these addrs */
 #endif
 
+/*
+ * IIM - IC Identification Module
+ */
+#undef CONFIG_IIM
+
 /*
  * EEPROM configuration
  */
@@ -348,11 +354,20 @@
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_DATE
+#undef CONFIG_CMD_FUSE
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_EXT2
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
 #endif
 
+#if defined(CONFIG_CMD_IDE)
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION
+#endif /* defined(CONFIG_CMD_IDE) */
+
 /*
  * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock.
  * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set
@@ -489,4 +504,48 @@
 #define OF_TBCLK               (bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH         "/soc@80000000/serial@11300"
 
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff
+ *-----------------------------------------------------------------------
+ */
+
+#undef  CONFIG_IDE_8xx_PCCARD          /* Use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
+#undef CONFIG_IDE_LED                  /* LED   for IDE not supported  */
+
+#define CONFIG_IDE_RESET               /* reset for IDE supported      */
+#define CONFIG_IDE_PREINIT
+
+#define CONFIG_SYS_IDE_MAXBUS          1       /* max. 1 IDE bus               */
+#define CONFIG_SYS_IDE_MAXDEVICE       2       /* max. 1 drive per IDE bus     */
+
+#define CONFIG_SYS_ATA_IDE0_OFFSET     0x0000
+#define CONFIG_SYS_ATA_BASE_ADDR       MPC512X_PATA
+
+/* Offset for data I/O                 RefMan MPC5121EE Table 28-10    */
+#define CONFIG_SYS_ATA_DATA_OFFSET     (0x00A0)
+
+/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_REG_OFFSET      (CONFIG_SYS_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers      RefMan MPC5121EE Table 28-23    */
+#define CONFIG_SYS_ATA_ALT_OFFSET      (0x00D8)
+
+/* Interval between registers  */
+#define CONFIG_SYS_ATA_STRIDE          4
+
+#define ATA_BASE_ADDR          MPC512X_PATA
+
+/*
+ * Control register bit definitions
+ */
+#define FSL_ATA_CTRL_FIFO_RST_B                0x80000000
+#define FSL_ATA_CTRL_ATA_RST_B         0x40000000
+#define FSL_ATA_CTRL_FIFO_TX_EN                0x20000000
+#define FSL_ATA_CTRL_FIFO_RCV_EN       0x10000000
+#define FSL_ATA_CTRL_DMA_PENDING       0x08000000
+#define FSL_ATA_CTRL_DMA_ULTRA         0x04000000
+#define FSL_ATA_CTRL_DMA_WRITE         0x02000000
+#define FSL_ATA_CTRL_IORDY_EN          0x01000000
+
 #endif /* __CONFIG_H */