Blackfin: bf548-ezkit: bump SPI flash size up

[oweals/u-boot.git] / include / configs / W7OLMG.h

diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h
index 73d6d24b61dc72400f150a145681dec358689868..f12fa55d2a1adef3224b571e3ea1130b4aa582af 100644 (file)
--- a/include/configs/W7OLMG.h
+++ b/include/configs/W7OLMG.h
@@ -40,6 +40,7 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F 1            /* Call board_early_init_f      */
 #define        CONFIG_MISC_INIT_F      1               /* and misc_init_f()            */
+#define        CONFIG_MISC_INIT_R      1               /* and misc_init_r()            */
 
 #define CONFIG_SYS_CLK_FREQ    33333333        /* external frequency to pll    */
 
@@ -132,6 +133,12 @@
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on             */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM          */
 
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+
 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK                    /* external serial clock */
 #define CONFIG_SYS_405_UART_ERRATA_59                  /* 405GP/CR Rev. D silicon */
 #define CONFIG_SYS_BASE_BAUD           384000
@@ -214,9 +221,9 @@
 #define CONFIG_SYS_EBC_PB5CR   0xFD87A000
 
 /* bank 6 is unused */
-/* pb6ap = 0 */
+/* PB6AP = 0 */
 #define CONFIG_SYS_EBC_PB6AP   0x00000000
-/* pb6cr = 0 */
+/* PB6CR = 0 */
 #define CONFIG_SYS_EBC_PB6CR   0x00000000
 
 /* bank 7 is LED register */
@@ -279,6 +286,7 @@
  * I2C EEPROM (ATMEL 24C04N)
  */
 #define CONFIG_HARD_I2C                1               /* Hardware assisted I2C        */
+#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
 #define CONFIG_SYS_I2C_SPEED           400000          /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE           0x7F