apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / UCP1020.h

diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
index 489e4e35f95bfcf95849162dc9fd64128f7bc8d3..b518c222d4365491be6413fb3ab03bcc8625eaab 100644 (file)
--- a/include/configs/UCP1020.h
+++ b/include/configs/UCP1020.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2013-2015 Arcturus Networks, Inc.
  *           http://www.arcturusnetworks.com/products/ucp1020/
  * based on include/configs/p1_p2_rdb_pc.h
  * original copyright follows:
  * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -39,8 +38,6 @@
 #define CONFIG_NETMASK         255.255.252.0
 #define CONFIG_ETHPRIME                "eTSEC3"
 
-#ifndef CONFIG_SPI_FLASH
-#endif
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 
 #define CONFIG_SYS_L2_SIZE     (256 << 10)
@@ -71,8 +68,6 @@
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_ETHPRIME                "eTSEC1"
 
-#ifndef CONFIG_SPI_FLASH
-#endif
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 
 #define CONFIG_SYS_L2_SIZE     (256 << 10)
@@ -82,14 +77,12 @@
 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD
 #define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_RESET_VECTOR_ADDRESS    0x1107fffc
 #endif
 
@@ -103,8 +96,6 @@
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
 
-#define CONFIG_MP
-
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_SYS_SATA_MAX_DEVICE     2
@@ -142,7 +133,6 @@
 #define CONFIG_DDR_SPD
 #endif
 #define CONFIG_SYS_SPD_BUS_NUM 1
-#undef CONFIG_FSL_DDR_INTERACTIVE
 
 #define CONFIG_SYS_SDRAM_SIZE_LAW      LAW_SIZE_512M
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
@@ -226,10 +216,7 @@
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xffd00000 /* stack in RAM */
@@ -299,14 +286,6 @@
 #define CONFIG_SYS_I2C_NCT72_ADDR      0x4C
 #define CONFIG_SYS_I2C_IDT6V49205B     0x69
 
-/*
- * eSPI - Enhanced SPI
- */
-#define CONFIG_HARD_SPI
-
-#define CONFIG_SF_DEFAULT_SPEED                10000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-
 #if defined(CONFIG_PCI)
 /*
  * General PCI
@@ -349,10 +328,6 @@
 
 #else
 
-#define CONFIG_ENV_SPI_BUS     0
-#define CONFIG_ENV_SPI_CS      0
-#define CONFIG_ENV_SPI_MAX_HZ  10000000
-#define CONFIG_ENV_SPI_MODE    0
 
 #ifdef CONFIG_RAMBOOT_SPIFLASH
 
@@ -449,7 +424,6 @@
 
 #define CONFIG_BOOTP_SERVERIP
 
-#define CONFIG_MII             /* MII PHY management */
 #define CONFIG_TSEC1_NAME      "eTSEC1"
 #define CONFIG_TSEC2_NAME      "eTSEC2"
 #define CONFIG_TSEC3_NAME      "eTSEC3"