Merge with git://www.denx.de/git/u-boot.git

[oweals/u-boot.git] / include / configs / TQM85xx.h

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index f45f3a2f5acaf78cf331bba7f1f74c142578815e..cb9bf5492950eb89e186b95704cc9d3534af0177 100644 (file)
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -258,16 +258,19 @@
 #define CONFIG_NET_MULTI       1
 
 #define CONFIG_MII             1       /* MII PHY management           */
-#define CONFIG_MPC85XX_TSEC1   1
-#define CONFIG_MPC85XX_TSEC1_NAME      "TSEC0"
-#define CONFIG_MPC85XX_TSEC2   1
-#define CONFIG_MPC85XX_TSEC2_NAME      "TSEC1"
+#define CONFIG_TSEC1   1
+#define CONFIG_TSEC1_NAME      "TSEC0"
+#define CONFIG_TSEC2   1
+#define CONFIG_TSEC2_NAME      "TSEC1"
 #define TSEC1_PHY_ADDR         2
 #define TSEC2_PHY_ADDR         1
 #define TSEC1_PHYIDX           0
 #define TSEC2_PHYIDX           0
+#define TSEC1_FLAGS            TSEC_GIGABIT
+#define TSEC2_FLAGS            TSEC_GIGABIT
 #define FEC_PHY_ADDR           3
 #define FEC_PHYIDX             0
+#define FEC_FLAGS              0
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
 
@@ -357,24 +360,35 @@
 
 #define        CONFIG_TIMESTAMP                /* Print image info with ts     */
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-# define ADD_PCI_CMD           (CFG_CMD_PCI)
-#else
-# define ADD_PCI_CMD           0
+    #define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_DHCP   | \
-                                CFG_CMD_NFS    | \
-                                CFG_CMD_SNTP   | \
-                                ADD_PCI_CMD    | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_DTT    | \
-                                CFG_CMD_MII    | \
-                                CFG_CMD_PING   )
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -385,7 +399,7 @@
 #define CFG_LOAD_ADDR  0x2000000       /* default load address         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size      */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size      */
@@ -406,7 +420,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value */
 #endif
 
@@ -418,7 +432,7 @@
 #define BOOTFLAG_COLD  0x01            /* Power-On: Boot from FLASH    */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use     */
 #endif