#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
/*
* Serial console configuration
*/
/* USB */
#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
+#define CFG_OHCI_BE_CONTROLLER
#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME "mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
#endif
#ifndef CONFIG_CAM5200
#endif
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
/*
* Command line configuration.
*/
#endif
#ifdef CONFIG_PCI
-#define CONFIG_CMD_CMD_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
#endif
#if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
"protect on FC000000 +${filesize}\0"
#endif
-#ifndef CONFIG_CAM5200
+#if defined(CONFIG_TQM5200)
#define CUSTOM_ENV_SETTINGS \
+ "hostname=tqm5200\0" \
"bootfile=/tftpboot/tqm5200/uImage\0" \
- "bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0" \
"fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \
"u-boot=/tftpboot/tqm5200/u-boot.bin\0"
-#else
+#elif defined(CONFIG_CAM5200)
#define CUSTOM_ENV_SETTINGS \
"bootfile=cam5200/uImage\0" \
"u-boot=cam5200/u-boot.bin\0" \
"setup=tftp 200000 cam5200/setup.img; autoscr 200000\0"
#endif
+#if defined(CONFIG_TQM5200_B)
+#define ENV_FLASH_LAYOUT \
+ "fdt_addr=FC100000\0" \
+ "kernel_addr=FC140000\0" \
+ "ramdisk_addr=FC600000\0"
+#else /* !CONFIG_TQM5200_B */
+#define ENV_FLASH_LAYOUT \
+ "fdt_addr=FC0A0000\0" \
+ "kernel_addr=FC0C0000\0" \
+ "ramdisk_addr=FC300000\0"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=ttyS0\0" \
- "kernel_addr=200000\0" \
- "fdt_addr=400000\0" \
- "hostname=tqm5200\0" \
"netdev=eth0\0" \
+ "console=ttyPSC0\0" \
+ ENV_FLASH_LAYOUT \
+ "kernel_addr_r=400000\0" \
+ "fdt_addr_r=600000\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
":${hostname}:${netdev}:off panic=1\0" \
"addcons=setenv bootargs ${bootargs} " \
"console=${console},${baudrate}\0" \
- "flash_self=run ramargs addip addcons;" \
+ "flash_self_old=sete console ttyS0; run ramargs addip addcons;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "flash_nfs=run nfsargs addip addcons;" \
+ "flash_self=run ramargs addip addcons;" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
- "net_nfs=tftp ${kernel_addr} ${bootfile};" \
- "run nfsargs addip addcons;bootm\0" \
- "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};" \
- "tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;" \
- "run nfsargs addip addcons;" \
+ "flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
+ "sete console ttyS0; run nfsargs addip addcons;bootm\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
+ "tftp ${fdt_addr_r} ${fdt_file}; " \
+ "run nfsargs addip addcons; " \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
CUSTOM_ENV_SETTINGS \
"load=tftp 200000 ${u-boot}\0" \
ENV_UPDT \
#else
/* use CFI flash driver */
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
(= chip selects) */
# if defined(CONFIG_TQM5200_B)
# if defined(CFG_LOWBOOT)
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \
- "1536k(kernel)," \
- "3584k(small-fs)," \
+ "256k(dtb)," \
+ "2304k(kernel)," \
+ "2560k(small-fs)," \
"2m(initrd)," \
"8m(misc)," \
"16m(big-fs)"
# endif /* CFG_LOWBOOT */
# else /* !CONFIG_TQM5200_B */
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \
- "1408k(kernel)," \
+ "128k(dtb)," \
+ "2304k(kernel)," \
"2m(initrd)," \
"4m(small-fs)," \
"8m(misc)," \
- "16m(big-fs)"
+ "15m(big-fs)"
# endif /* CONFIG_TQM5200_B */
#elif defined (CONFIG_CAM5200)
# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \
# if defined (CONFIG_TQM5200_REV100)
# error TQM5200 REV100 not supported on STK52XX REV200 or above
# else/* TQM5200 REV200 and above */
-# define CFG_GPS_PORT_CONFIG 0x91500004
+# define CFG_GPS_PORT_CONFIG 0x91500404
# endif
# endif
#elif defined (CONFIG_FO300)
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
/*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
*/
#define CONFIG_LOOPW
* Open firmware flat tree support
*-----------------------------------------------------------------------
*/
-#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-/* maximum size of the flat tree (8K) */
-#define OF_FLAT_TREE_MAX_SIZE 8192
#define OF_CPU "PowerPC,5200@0"
#define OF_SOC "soc5200@f0000000"
#define OF_TBCLK (bd->bi_busfreq / 4)