apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / T102xRDB.h

diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 673d1112e22aec0606061d9d44b1977d6954193c..d90181f12ae77462215c0faee07eb8b8ef1c9ca2 100644 (file)
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -32,7 +32,6 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
 #define RESET_VECTOR_OFFSET            0x27FFC
@@ -144,10 +143,6 @@
 #endif
 
 #if defined(CONFIG_SPIFLASH)
-#define CONFIG_ENV_SPI_BUS             0
-#define CONFIG_ENV_SPI_CS              0
-#define CONFIG_ENV_SPI_MAX_HZ          10000000
-#define CONFIG_ENV_SPI_MODE            0
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET              0x100000        /* 1MB */
 #if defined(CONFIG_TARGET_T1024RDB)
@@ -236,7 +231,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
-#define CONFIG_FSL_DDR_INTERACTIVE
 #if defined(CONFIG_TARGET_T1024RDB)
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_SPD_BUS_NUM 0
@@ -498,9 +492,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_SPI_FLASH_BAR
-#define CONFIG_SF_DEFAULT_SPEED        10000000
-#define CONFIG_SF_DEFAULT_MODE 0
 
 /*
  * General PCIe
@@ -658,16 +649,12 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_DPAA_FMAN
 
-#ifdef CONFIG_TARGET_T1024RDB
-#define CONFIG_QE
-#endif
 /* Default address of microcode for the Linux FMan driver */
 #if defined(CONFIG_SPIFLASH)
 /*
  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
  * env, so we got 0x110000.
  */
-#define CONFIG_SYS_QE_FW_IN_SPIFLASH
 #define CONFIG_SYS_FMAN_FW_ADDR        0x110000
 #define CONFIG_SYS_QE_FW_ADDR  0x130000
 #elif defined(CONFIG_SDCARD)
@@ -676,11 +663,9 @@ unsigned long get_board_ddr_clk(void);
  * about 1MB (2048 blocks), Env is stored after the image, and the env size is
  * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
  */
-#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 #define CONFIG_SYS_FMAN_FW_ADDR                (512 * 0x820)
 #define CONFIG_SYS_QE_FW_ADDR          (512 * 0x920)
 #elif defined(CONFIG_NAND)
-#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 #if defined(CONFIG_TARGET_T1024RDB)
 #define CONFIG_SYS_FMAN_FW_ADDR                (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_SYS_QE_FW_ADDR          (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
@@ -696,10 +681,8 @@ unsigned long get_board_ddr_clk(void);
  * slave SRIO or PCIE outbound window->master inbound window->
  * master LAW->the ucode address in master's memory space.
  */
-#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
 #define CONFIG_SYS_FMAN_FW_ADDR                0xFFE00000
 #else
-#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #define CONFIG_SYS_QE_FW_ADDR          0xEFE00000
 #endif
@@ -708,7 +691,6 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_FMAN_ENET
 #define CONFIG_PHY_REALTEK
 #if defined(CONFIG_TARGET_T1024RDB)
 #define RGMII_PHY1_ADDR                0x2