Merge branch '2020-05-07-more-kconfig-migrations'

[oweals/u-boot.git] / include / configs / T102xQDS.h

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index c6b88c16545c25fe7ffe80ffa69b2bd08d7ab2f0..5f358c13eae695547dd662026df253e93886a60e 100644 (file)
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
+ * Copyright 2020 NXP
  */
 
 /*
@@ -39,7 +40,7 @@
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
@@ -147,9 +148,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
 #endif
 
-#define CONFIG_SYS_MEMTEST_START       0x00200000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x00400000
-
 /*
  *  Config the L3 Cache as L3 SRAM
  */
@@ -317,7 +315,7 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
-#if defined(CONFIG_NAND)
+#if defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR0               CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK0              CONFIG_SYS_NAND_AMASK
@@ -437,14 +435,20 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 #define CONFIG_SYS_FSL_I2C_SPEED       50000   /* I2C speed in Hz */
 #define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
 #define CONFIG_SYS_FSL_I2C2_SPEED      50000   /* I2C speed in Hz */
 #define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET      0x118000
 #define CONFIG_SYS_FSL_I2C2_OFFSET     0x118100
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER  0
+#endif
+
+#define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
 
 #define I2C_MUX_PCA_ADDR               0x77
 #define I2C_MUX_PCA_ADDR_PRI           0x77 /* Primary Mux*/
@@ -460,6 +464,7 @@ unsigned long get_board_ddr_clk(void);
 /* LDI/DVI Encoder for display */
 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
+#define CONFIG_SYS_I2C_DVI_BUS_NUM 0
 
 /*
  * RTC configuration
@@ -632,7 +637,7 @@ unsigned long get_board_ddr_clk(void);
  */
 #define CONFIG_SYS_FMAN_FW_ADDR                (512 * 0x820)
 #define CONFIG_SYS_QE_FW_ADDR          (512 * 0x920)
-#elif defined(CONFIG_NAND)
+#elif defined(CONFIG_MTD_RAW_NAND)
 #define CONFIG_SYS_FMAN_FW_ADDR                (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_SYS_QE_FW_ADDR          (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
@@ -653,10 +658,6 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NOBQFMAN */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_PHYLIB_10G
-#define CONFIG_PHY_VITESSE
-#define CONFIG_PHY_REALTEK
-#define CONFIG_PHY_TERANETICS
 #define RGMII_PHY1_ADDR                0x1
 #define RGMII_PHY2_ADDR                0x2
 #define SGMII_CARD_AQ_PHY_ADDR_S3 0x3