Enable address translation on MPC83xx

[oweals/u-boot.git] / include / configs / Sandpoint8240.h

diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
index 5bf184ea94fe180166907ce1af901f33c22ab60e..f4339ecd9c8209fb0ce3a4299bc8eedf15f6d94e 100644 (file)
--- a/include/configs/Sandpoint8240.h
+++ b/include/configs/Sandpoint8240.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -61,16 +61,16 @@
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
-               "nfsroot=$(serverip):$(rootpath)\0"                     \
+               "nfsroot=${serverip}:${rootpath}\0"                     \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
-       "addip=setenv bootargs $(bootargs) "                            \
-               "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
-               ":$(hostname):$(netdev):off panic=1\0"                  \
-       "net_self=tftp $(kernel_addr) $(bootfile);"                     \
-               "tftp $(ramdisk_addr) $(ramdisk);"                      \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
+       "net_self=tftp ${kernel_addr} ${bootfile};"                     \
+               "tftp ${ramdisk_addr} ${ramdisk};"                      \
                "run ramargs addip;"                                    \
-               "bootm $(kernel_addr) $(ramdisk_addr)\0"                \
-       "net_nfs=tftp $(kernel_addr) $(bootfile);"                      \
+               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
+       "net_nfs=tftp ${kernel_addr} ${bootfile};"                      \
                "run nfsargs addip;bootm\0"                             \
        "rootpath=/opt/eldk/ppc_82xx\0"                                 \
        "bootfile=/tftpboot/SP8240/uImage\0"                            \
@@ -80,12 +80,15 @@
        ""
 #define CONFIG_BOOTCOMMAND     "run flash_self"
 
-#define CONFIG_COMMANDS                ( (CONFIG_CMD_DFL & ~CFG_CMD_AUTOSCRIPT) | \
-                                 CFG_CMD_ELF    | \
-                                 CFG_CMD_I2C    | \
-                                 CFG_CMD_SDRAM  | \
-                                 CFG_CMD_EEPROM | \
-                                 CFG_CMD_PCI )
+#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
+                               CFG_CMD_DHCP    | \
+                               CFG_CMD_ELF     | \
+                               CFG_CMD_I2C     | \
+                               CFG_CMD_SDRAM   | \
+                               CFG_CMD_EEPROM  | \
+                               CFG_CMD_NFS     | \
+                               CFG_CMD_PCI     | \
+                               CFG_CMD_SNTP    )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any)      */
 #include <cmd_confdefs.h>
@@ -269,7 +272,7 @@
  */
 
 #define CONFIG_SYS_CLK_FREQ  33000000  /* external frequency to pll */
-#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2
+#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  1
 
 #define CFG_ROMNAL             7       /*rom/flash next access time            */
 #define CFG_ROMFAL             11      /*rom/flash access time                 */