NAND finally working. Two bugs fixed:

[oweals/u-boot.git] / include / configs / SBC8560.h

diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
index cf5ef63d1a27675b015746d170abb302e4c0a169..8b46a17ed58779db1e4e3cb5a0dabb0a45ab7f77 100644 (file)
--- a/include/configs/SBC8560.h
+++ b/include/configs/SBC8560.h
@@ -33,6 +33,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#if XXX
+#define DEBUG                /* General debug */
+#define ET_DEBUG
+#endif
+#define TSEC_DEBUG
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE                        */
 #define CONFIG_E500            1       /* BOOKE e500 family            */
@@ -40,11 +46,10 @@
 #define CONFIG_MPC85xx_REV1    1       /* MPC85xx Rev 1.0 chip         */
 
 
-#define CONFIG_MPC8560         1       /* MPC8560 specific             */
-#define CONFIG_SBC8560         1       /* configuration for SBC8560 board */
+#define CONFIG_CPM2            1       /* has CPM2 */
+#define CONFIG_SBC8560         1       /* configuration for SBC8560 board */
 
-/* XXX flagging this as something I might want to delete */
-#define CONFIG_MPC8560ADS      1       /* MPC8560ADS board specific    */
+#define CONFIG_MPC8560ADS      1       /* MPC8560ADS board specific (supplement)       */
 
 #define CONFIG_TSEC_ENET               /* tsec ethernet support        */
 #undef CONFIG_PCI                      /* pci ethernet support         */
@@ -177,7 +182,7 @@
 #undef  CONFIG_CONS_ON_SCC                     /* define if console on SCC */
 #undef CONFIG_CONS_NONE                        /* define if console on something else */
 
-#define CONFIG_CONS_INDEX      1
+#define CONFIG_CONS_INDEX     1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CFG_NS16550
 #define CFG_NS16550_SERIAL
@@ -210,10 +215,15 @@
 
 #if defined(CONFIG_TSEC_ENET)          /* TSEC Ethernet port */
 
-  #define CONFIG_NET_MULTI     1
-  #define CONFIG_PHY_BCM5421S  1       /* GigaBit Ether PHY         */
-  #define CONFIG_MII           1       /* MII PHY management           */
-  #define CONFIG_PHY_ADDR      25      /* PHY address                  */
+#  define CONFIG_NET_MULTI     1
+#  define CONFIG_MII           1       /* MII PHY management           */
+#  define CONFIG_MPC85xx_TSEC1
+#  define CONFIG_MPC85xx_TSEC1_NAME    "TSEC0"
+#  define TSEC1_PHY_ADDR       25
+#  define TSEC1_PHYIDX         0
+/* Options are: TSEC0 */
+#  define CONFIG_ETHPRIME              "TSEC0"
+
 
 #elif defined(CONFIG_ETHER_ON_FCC)     /* CPM FCC Ethernet */
 
@@ -382,17 +392,19 @@
 
 /*Note: change below for your network setting!!! */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-  #define CONFIG_ETHADDR       00:01:af:07:9b:8a
-  #define CONFIG_ETH1ADDR      00:01:af:07:9b:8b
-  #define CONFIG_ETH2ADDR      00:01:af:07:9b:8c
+#  define CONFIG_ETHADDR       00:vv:ww:xx:yy:8a
+#  define CONFIG_HAS_ETH1
+#  define CONFIG_ETH1ADDR      00:vv:ww:xx:yy:8b
+#  define CONFIG_HAS_ETH2
+#  define CONFIG_ETH2ADDR      00:vv:ww:xx:yy:8c
 #endif
 
-#define CONFIG_SERVERIP                192.168.0.131
-#define CONFIG_IPADDR          192.168.0.105
-#define CONFIG_GATEWAYIP       0.0.0.0
+#define CONFIG_SERVERIP                YourServerIP
+#define CONFIG_IPADDR          YourTargetIP
+#define CONFIG_GATEWAYIP       YourGatewayIP
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_HOSTNAME                SBC8560
-#define CONFIG_ROOTPATH                /home/ppc
-#define CONFIG_BOOTFILE                pImage
+#define CONFIG_ROOTPATH                YourRootPath
+#define CONFIG_BOOTFILE                YourImageName
 
 #endif /* __CONFIG_H */