Merge branch 'denx-coldfire' into coldfire-aug2007

[oweals/u-boot.git] / include / configs / PM856.h

diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 5dae1b6b02ca9941b5d52b533ffa449b2e3c48fd..6105747c70e4c3d9f4be9a1c51c53c33e4e93595 100644 (file)
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -39,6 +39,7 @@
 #define CONFIG_E500            1       /* BOOKE e500 family */
 #define CONFIG_MPC85xx         1       /* MPC8540/MPC8560 */
 #define CONFIG_MPC8560         1       /* MPC8560 specific */
+#define CONFIG_CPM2            1       /* Has a CPM2 */
 #define CONFIG_PM856           1       /* PM856 board specific */
 
 #define CONFIG_PCI
@@ -48,6 +49,7 @@
 #define CONFIG_DDR_ECC                 /* only for ECC DDR module */
 #define CONFIG_DDR_DLL                 /* possible DLL fix needed */
 #define CONFIG_DDR_2T_TIMING           /* Sets the 2T timing bit */
+#define CONFIG_MEM_INIT_VALUE          0xDEADBEEF
 
 
 /*
@@ -188,12 +190,16 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
-#define  CONFIG_HARD_I2C               /* I2C with hardware support*/
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C                /* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged */
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address */
 #define CFG_I2C_SLAVE          0x7F
 #define CFG_I2C_NOPROBES        {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET         0x3000
 
 /*
  * EEPROM configuration
@@ -252,17 +258,20 @@
 #endif
 
 #define CONFIG_MII             1       /* MII PHY management */
-#define CONFIG_MPC85XX_TSEC1   1
-#define CONFIG_MPC85XX_TSEC2   1
-#undef CONFIG_MPC85XX_FEC
+#define CONFIG_TSEC1   1
+#define CONFIG_TSEC1_NAME      "TSEC0"
+#define CONFIG_TSEC2   1
+#define CONFIG_TSEC2_NAME      "TSEC1"
 #define TSEC1_PHY_ADDR         0
 #define TSEC2_PHY_ADDR         1
 #define TSEC1_PHYIDX           0
 #define TSEC2_PHYIDX           0
+#define TSEC1_FLAGS            TSEC_GIGABIT
+#define TSEC2_FLAGS            TSEC_GIGABIT
 
 #endif  /* CONFIG_TSEC_ENET */
 
-#define CONFIG_ETHPRIME                "ENET0"
+#define CONFIG_ETHPRIME                "TSEC0"
 
 #define CONFIG_ETHER_ON_FCC    /* define if ether on FCC   */
 #undef  CONFIG_ETHER_NONE      /* define if ether on something else */
@@ -298,41 +307,35 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+
+#if defined(CONFIG_PCI)
+    #define CONFIG_CMD_PCI
+#endif
+
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_PCI          \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #else
-    #define  CONFIG_COMMANDS   ((CONFIG_CMD_DFL        \
-                                | CFG_CMD_PING         \
-                                | CFG_CMD_I2C)         \
-                               &                       \
-                                ~(CFG_CMD_ENV          \
-                                 | CFG_CMD_LOADS))
-  #endif
-#else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_EEPROM        \
-                               | CFG_CMD_DATE          \
-                               | CFG_CMD_PCI           \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #else
-    #define  CONFIG_COMMANDS   (CONFIG_CMD_DFL         \
-                               | CFG_CMD_EEPROM        \
-                               | CFG_CMD_DATE          \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_I2C)
-  #endif
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
@@ -343,7 +346,7 @@
 #define CFG_LOAD_ADDR  0x1000000       /* default load address */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size */
@@ -365,7 +368,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 #endif
 
@@ -377,7 +380,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM  0x02            /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif