Enable address translation on MPC83xx

[oweals/u-boot.git] / include / configs / PM828.h

diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index d6a926d32f3b4257532eec9ef1b3557e9808e58e..982a1f814301a57cbbb27b2937137cb390758e81 100644 (file)
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2001-2004
+ * (C) Copyright 2001-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -37,11 +37,10 @@
 
 #define CONFIG_MPC8260         1       /* This is a MPC8260 CPU        */
 #define CONFIG_PM828           1       /* ...on a PM828 module */
+#define CONFIG_CPM2            1       /* Has a CPM2 */
 
 #undef CONFIG_DB_CR826_J30x_ON         /* J30x jumpers on D.B. carrier */
 
-#define CONFIG_CLOCKS_IN_MHZ   1       /* clocks passsed to Linux in MHz */
-
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
 
 #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
@@ -49,8 +48,8 @@
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND                                                     \
        "bootp;"                                                                \
-       "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) "     \
-       "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;"    \
+       "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
+       "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"    \
        "bootm"
 
 /* enable I2C and select the hardware/software driver */
@@ -156,20 +155,26 @@
 #define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
 #ifdef CONFIG_PCI
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_BEDBUG | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_DOC    | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_PCI)
+#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
+                               CFG_CMD_BEDBUG  | \
+                               CFG_CMD_DATE    | \
+                               CFG_CMD_DHCP    | \
+                               CFG_CMD_DOC     | \
+                               CFG_CMD_EEPROM  | \
+                               CFG_CMD_I2C     | \
+                               CFG_CMD_NFS     | \
+                               CFG_CMD_PCI     | \
+                               CFG_CMD_SNTP    )
 #else  /* ! PCI */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_BEDBUG | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_DOC    | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_I2C    )
+#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
+                               CFG_CMD_BEDBUG  | \
+                               CFG_CMD_DATE    | \
+                               CFG_CMD_DHCP    | \
+                               CFG_CMD_DOC     | \
+                               CFG_CMD_EEPROM  | \
+                               CFG_CMD_I2C     | \
+                               CFG_CMD_NFS     | \
+                               CFG_CMD_SNTP    )
 #endif /* CONFIG_PCI */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */