apalis/colibri imx6: provide proper fdtfile value

[oweals/u-boot.git] / include / configs / MPC8572DS.h

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index ebc2e3aad493e162553ed3dece03e9ebee217f59..13fbbb3044b8fbba26a67961c82c8e854daf39e5 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -13,10 +12,6 @@
 
 #include "../board/freescale/common/ics307_clk.h"
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xeff40000
-#endif
-
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 #define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
 #endif
@@ -26,7 +21,6 @@
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_MP              1       /* support multiple processors */
 
 #define CONFIG_PCIE1           1       /* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2           1       /* PCIE controller 2 (slot 2) */
@@ -36,7 +30,6 @@
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_SYS_CLK_FREQ    get_board_sys_clk() /* sysclk for MPC85xx */
@@ -58,7 +51,6 @@
 
 #define CONFIG_SYS_MEMTEST_START       0x00000000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x7fffffff
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
 /*
  * Config the L2 Cache as L2 SRAM
@@ -81,7 +73,6 @@
 
 /* DDR Setup */
 #define CONFIG_VERY_BIG_RAM
-#undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup */
 #define CONFIG_DDR_SPD
 
@@ -180,13 +171,9 @@
 
 #undef CONFIG_SYS_RAMBOOT
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 
-#define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */
-
 #define CONFIG_HWCONFIG                        /* enable hwconfig */
 #define CONFIG_FSL_PIXIS       1       /* use common PIXIS code */
 #define PIXIS_BASE     0xffdf0000      /* PIXIS registers */
@@ -343,7 +330,6 @@
  * open - index 2
  * shorted - index 1
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -475,14 +461,12 @@
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    4
 #define CONFIG_SYS_SCSI_MAX_LUN        1
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SYS_SCSI_MAXDEVICE      CONFIG_SYS_SCSI_MAX_DEVICE
 #endif /* SCSI */
 
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_TSEC_ENET)
 
-#define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "eTSEC1"
@@ -552,9 +536,6 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
 /*
@@ -581,7 +562,7 @@
 
 #define CONFIG_IPADDR          192.168.1.254
 
-#define CONFIG_HOSTNAME                unknown
+#define CONFIG_HOSTNAME                "unknown"
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       u-boot.bin      /* U-Boot image on TFTP server */