MX51: vision2: Fix build for vision2 board.

[oweals/u-boot.git] / include / configs / MPC8568MDS.h

diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index a491650ab914a128085cd4820e8f8911b3e3c401..f7df7f0388000c654df8dcea38c4846c674b3126 100644 (file)
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004-2007, 2010 Freescale Semiconductor.
+ * Copyright 2004-2007, 2010-2011 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -35,6 +35,9 @@
 
 #define        CONFIG_SYS_TEXT_BASE    0xfff80000
 
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1                   /* SRIO port 1 */
+
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
 #define CONFIG_PCI1            1       /* PCI controller */
 #define CONFIG_PCIE1           1       /* PCIE controller */
@@ -303,9 +306,10 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PCIE1_IO_PHYS       0xe2800000
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00800000      /* 8M */
 
-#define CONFIG_SYS_SRIO_MEM_VIRT       0xc0000000
-#define CONFIG_SYS_SRIO_MEM_BUS        0xc0000000
-#define CONFIG_SYS_SRIO_MEM_PHYS       0xc0000000
+#define CONFIG_SYS_SRIO1_MEM_VIRT      0xC0000000
+#define CONFIG_SYS_SRIO1_MEM_BUS       0xC0000000
+#define CONFIG_SYS_SRIO1_MEM_PHYS      CONFIG_SYS_SRIO1_MEM_BUS
+#define CONFIG_SYS_SRIO1_MEM_SIZE      0x20000000      /* 512M */
 
 #ifdef CONFIG_QE
 /*
@@ -330,7 +334,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
@@ -342,7 +346,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
 #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 #endif /* CONFIG_QE */
@@ -447,10 +451,11 @@ extern unsigned long get_clock_freq(void);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 16 MB of memory, since this is
+ * have to be in the first 64 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (64 << 20)      /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */