Merge tag 'u-boot-atmel-fixes-2019.07-a' of git://git.denx.de/u-boot-atmel
[oweals/u-boot.git] / include / configs / MPC8560ADS.h
index 672ae5007c9c1becd5fd7db47b1129949c25f4d6..5ba2b6d64348803c770d46e7c06298149fabe067 100644 (file)
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2004, 2011 Freescale Semiconductor.
  * (C) Copyright 2002,2003 Motorola,Inc.
  * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
  * default CCARBAR is at 0xff700000
  * assume U-Boot is less than 0.5MB
  */
-#define        CONFIG_SYS_TEXT_BASE    0xfff80000
 
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
-#define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_RESET_PHY_R     1       /* Call reset_phy() */
@@ -69,7 +66,6 @@
 /* DDR Setup */
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
-#undef CONFIG_FSL_DDR_INTERACTIVE
 
 #define CONFIG_MEM_INIT_VALUE          0xDeadBeef
 
 #undef  CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 #undef CONFIG_CLOCKS_IN_MHZ
 /* Serial Port */
 #define CONFIG_CONS_ON_SCC     /* define if console on SCC */
 #undef  CONFIG_CONS_NONE       /* define if console on something else */
-#define CONFIG_CONS_INDEX       1  /* which serial channel for console */
 
 #define CONFIG_SYS_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
 #ifdef CONFIG_TSEC_ENET
 
-#ifndef CONFIG_MII
-#define CONFIG_MII             1       /* MII PHY management */
-#endif
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
 #define CONFIG_TSEC2   1
   #define FETH3_RST            0x80
 #endif                                 /* CONFIG_ETHER_INDEX */
 
-#ifndef CONFIG_MII
-#define CONFIG_MII             1       /* MII PHY management */
-#endif
-
 #define CONFIG_BITBANGMII              /* bit-bang MII PHY management */
 
 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x1000000       /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-    #define CONFIG_SYS_CBSIZE  1024            /* Console I/O Buffer Size */
-#else
-    #define CONFIG_SYS_CBSIZE  256             /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 
 /*
 
 #define CONFIG_IPADDR    192.168.1.253
 
-#define CONFIG_HOSTNAME                unknown
+#define CONFIG_HOSTNAME                "unknown"
 #define CONFIG_ROOTPATH                "/nfsroot"
 #define CONFIG_BOOTFILE                "your.uImage"
 
 
 #define CONFIG_LOADADDR  200000        /* default location for tftp and bootm */
 
-#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "consoledev=ttyCPM\0"                                           \