Merge branch 'master' of /home/wd/git/u-boot/custodians

[oweals/u-boot.git] / include / configs / MPC8555CDS.h

diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 41870f1e250d3db43f3eacc676cc3d5465141a7c..94952dc9909a1ec0e470fa7251b2a9f1dedecf75 100644 (file)
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -38,6 +38,7 @@
 #define CONFIG_MPC8555CDS      1       /* MPC8555CDS board specific */
 
 #define CONFIG_PCI
+#define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
@@ -62,7 +63,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_L2_CACHE                            /* toggle L2 cache  */
 #define CONFIG_BTB                         /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING              /* toggle addr streaming   */
 
 #define CONFIG_SYS_MEMTEST_START       0x00200000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
@@ -204,42 +204,19 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_LBC_LSRT            0x20000000  /* LB sdram refresh timer */
 #define CONFIG_SYS_LBC_MRTPR           0x00000000  /* LB refresh timer prescal*/
 
-/*
- * LSDMR masks
- */
-#define CONFIG_SYS_LBC_LSDMR_RFEN      (1 << (31 -  1))
-#define CONFIG_SYS_LBC_LSDMR_BSMA1516  (3 << (31 - 10))
-#define CONFIG_SYS_LBC_LSDMR_BSMA1617  (4 << (31 - 10))
-#define CONFIG_SYS_LBC_LSDMR_RFCR16    (7 << (31 - 16))
-#define CONFIG_SYS_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
-#define CONFIG_SYS_LBC_LSDMR_ACTTORW7  (7 << (31 - 22))
-#define CONFIG_SYS_LBC_LSDMR_ACTTORW6  (6 << (31 - 22))
-#define CONFIG_SYS_LBC_LSDMR_BL8       (1 << (31 - 23))
-#define CONFIG_SYS_LBC_LSDMR_WRC4      (0 << (31 - 27))
-#define CONFIG_SYS_LBC_LSDMR_CL3       (3 << (31 - 31))
-
-#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_MRW    (3 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_PRECH  (4 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
-#define CONFIG_SYS_LBC_LSDMR_OP_RWINV  (7 << (31 - 4))
-
 /*
  * Common settings for all Local Bus SDRAM commands.
  * At run time, either BSMA1516 (for CPU 1.1)
  *                  or BSMA1617 (for CPU 1.0) (old)
  * is OR'ed in too.
  */
-#define CONFIG_SYS_LBC_LSDMR_COMMON    ( CONFIG_SYS_LBC_LSDMR_RFCR16           \
-                               | CONFIG_SYS_LBC_LSDMR_PRETOACT7        \
-                               | CONFIG_SYS_LBC_LSDMR_ACTTORW7 \
-                               | CONFIG_SYS_LBC_LSDMR_BL8              \
-                               | CONFIG_SYS_LBC_LSDMR_WRC4             \
-                               | CONFIG_SYS_LBC_LSDMR_CL3              \
-                               | CONFIG_SYS_LBC_LSDMR_RFEN             \
+#define CONFIG_SYS_LBC_LSDMR_COMMON    ( LSDMR_RFCR16          \
+                               | LSDMR_PRETOACT7       \
+                               | LSDMR_ACTTORW7        \
+                               | LSDMR_BL8             \
+                               | LSDMR_WRC4            \
+                               | LSDMR_CL3             \
+                               | LSDMR_RFEN            \
                                )
 
 /*
@@ -278,7 +255,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BR3_PRELIM   0xf8000801
 #define CONFIG_SYS_OR3_PRELIM   0xfff00ff7
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR       0xe4010000      /* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END        0x4000      /* End of used area in RAM */
@@ -340,17 +316,21 @@ extern unsigned long get_clock_freq(void);
  * General PCI
  * Addresses are mapped 1-1.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE       0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_VIRT       0x80000000
+#define CONFIG_SYS_PCI1_MEM_BUS        0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS       0x80000000
 #define CONFIG_SYS_PCI1_MEM_SIZE       0x20000000      /* 512M */
-#define CONFIG_SYS_PCI1_IO_BASE        0x00000000
+#define CONFIG_SYS_PCI1_IO_VIRT        0xe2000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS        0xe2000000
 #define CONFIG_SYS_PCI1_IO_SIZE        0x00100000      /* 1M */
 
-#define CONFIG_SYS_PCI2_MEM_BASE       0xa0000000
-#define CONFIG_SYS_PCI2_MEM_PHYS       CONFIG_SYS_PCI2_MEM_BASE
+#define CONFIG_SYS_PCI2_MEM_VIRT       0xa0000000
+#define CONFIG_SYS_PCI2_MEM_BUS        0xa0000000
+#define CONFIG_SYS_PCI2_MEM_PHYS       0xa0000000
 #define CONFIG_SYS_PCI2_MEM_SIZE       0x20000000      /* 512M */
-#define CONFIG_SYS_PCI2_IO_BASE        0x00000000
+#define CONFIG_SYS_PCI2_IO_VIRT        0xe2100000
+#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
 #define CONFIG_SYS_PCI2_IO_PHYS        0xe2100000
 #define CONFIG_SYS_PCI2_IO_SIZE        0x00100000      /* 1M */
 
@@ -458,10 +438,10 @@ extern unsigned long get_clock_freq(void);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 16 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions