ARMV7: AM3517/05: Add support for CraneBoard.

[oweals/u-boot.git] / include / configs / MPC8548CDS.h

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index b221a5cc9a9ec5f2139386f0a4f5e84a71d3f909..43e2c2eb17c627aac49c1ccf96bdaa76aaee6560 100644 (file)
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -40,10 +40,12 @@
 #define CONFIG_SYS_TEXT_BASE   0xfff80000
 #endif
 
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1                   /* SRIO port 1 */
+
 #define CONFIG_PCI             /* enable any pci type devices */
 #define CONFIG_PCI1            /* PCI controller 1 */
 #define CONFIG_PCIE1           /* PCIE controler 1 (slot 1) */
-#undef CONFIG_RIO
 #undef CONFIG_PCI2
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
@@ -89,7 +91,7 @@ extern unsigned long get_clock_freq(void);
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
-#define CONFIG_DDR_DLL                 /* possible DLL fix needed */
+#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN    /* possible DLL fix needed */
 
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER      /* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE  0xDeadBeef
@@ -353,6 +355,7 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 #ifdef CONFIG_PCIE1
+#define CONFIG_SYS_PCIE1_NAME          "Slot"
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_BUS       0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS      0xa0000000
@@ -363,14 +366,13 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00100000      /*   1M */
 #endif
 
-#ifdef CONFIG_RIO
 /*
  * RapidIO MMU
  */
-#define CONFIG_SYS_RIO_MEM_VIRT        0xC0000000
-#define CONFIG_SYS_RIO_MEM_BUS 0xC0000000
-#define CONFIG_SYS_RIO_MEM_SIZE        0x20000000      /* 512M */
-#endif
+#define CONFIG_SYS_SRIO1_MEM_VIRT      0xC0000000
+#define CONFIG_SYS_SRIO1_MEM_BUS       0xC0000000
+#define CONFIG_SYS_SRIO1_MEM_PHYS      CONFIG_SYS_SRIO1_MEM_BUS
+#define CONFIG_SYS_SRIO1_MEM_SIZE      0x20000000      /* 512M */
 
 #ifdef CONFIG_LEGACY
 #define BRIDGE_ID 17
@@ -493,6 +495,7 @@ extern unsigned long get_clock_freq(void);
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */