arm nomadik: activate defrag choose 4k transfer block size

[oweals/u-boot.git] / include / configs / MPC8536DS.h

diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index e379d5327d9acbb709045312bc98567cf4f4f16e..9d2b8600c29290efbeaef52c66eb142339797170 100644 (file)
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -45,6 +45,7 @@
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 
 #define CONFIG_FSL_LAW         1       /* Use common FSL init code */
+#define CONFIG_E1000           1       /* Defind e1000 pci Ethernet card*/
 
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -72,6 +73,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_L2_CACHE                        /* toggle L2 cache */
 #define CONFIG_BTB                     /* toggle branch predition */
 
+#define CONFIG_BOARD_EARLY_INIT_F      1       /* Call board_pre_init */
+
 #define CONFIG_ENABLE_36BIT_PHYS       1
 
 #define CONFIG_SYS_MEMTEST_START       0x00000000      /* memtest works on */
@@ -216,6 +219,13 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define PIXIS_VCFGEN1          0x13    /* VELA Config Enable 1 */
 #define PIXIS_VCORE0           0x14    /* VELA VCORE0 Register */
 #define PIXIS_VBOOT            0x16    /* VELA VBOOT Register */
+#define PIXIS_VBOOT_LBMAP      0xe0    /* VBOOT - CFG_LBMAP */
+#define PIXIS_VBOOT_LBMAP_NOR0 0x00    /* cfg_lbmap - boot from NOR 0 */
+#define PIXIS_VBOOT_LBMAP_NOR1 0x01    /* cfg_lbmap - boot from NOR 1 */
+#define PIXIS_VBOOT_LBMAP_NOR2 0x02    /* cfg_lbmap - boot from NOR 2 */
+#define PIXIS_VBOOT_LBMAP_NOR3 0x03    /* cfg_lbmap - boot from NOR 3 */
+#define PIXIS_VBOOT_LBMAP_PJET 0x04    /* cfg_lbmap - boot from projet */
+#define PIXIS_VBOOT_LBMAP_NAND 0x05    /* cfg_lbmap - boot from NAND */
 #define PIXIS_VSPEED0          0x17    /* VELA VSpeed 0 */
 #define PIXIS_VSPEED1          0x18    /* VELA VSpeed 1 */
 #define PIXIS_VSPEED2          0x19    /* VELA VSpeed 2 */
@@ -335,7 +345,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_HARD_I2C                /* I2C with hardware support */
 #undef CONFIG_SOFT_I2C         /* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE           0x7F
 #define CONFIG_SYS_I2C_NOPROBES        {{0, 0x29}}     /* Don't probe these addrs */
@@ -426,12 +435,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #undef CONFIG_TULIP
 #undef CONFIG_RTL8139
 
-#ifdef CONFIG_RTL8139
-/* This macro is used by RTL8139 but not defined in PPC architecture */
-#define KSEG1ADDR(x)           ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);})
-#define _IO_BASE       0x00000000
-#endif
-
 #ifndef CONFIG_PCI_PNP
        #define PCI_ENET0_IOADDR        CONFIG_SYS_PCI1_IO_BUS
        #define PCI_ENET0_MEMADDR       CONFIG_SYS_PCI1_IO_BUS
@@ -461,6 +464,15 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CMD_EXT2
 #endif
 
+/*
+ * USB
+ */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+
 #if defined(CONFIG_TSEC_ENET)
 
 #ifndef CONFIG_NET_MULTI
@@ -522,12 +534,23 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_BEDBUG
 #define CONFIG_CMD_NET
 #endif
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
+#define CONFIG_MMC     1
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -547,10 +570,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 16 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
 
 /*
  * Internal Definitions
@@ -614,7 +637,8 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  "ramdiskfile=8536ds/ramdisk.uboot\0"          \
  "fdtaddr=c00000\0"                            \
  "fdtfile=8536ds/mpc8536ds.dtb\0"              \
- "bdev=sda3\0"
+ "bdev=sda3\0"                                 \
+ "usb_phy_type=ulpi\0"
 
 #define CONFIG_HDBOOT                          \
  "setenv bootargs root=/dev/$bdev rw "         \