stm32mp1: board: add spi nand support

[oweals/u-boot.git] / include / configs / MPC837XERDB.h

diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index c1898a53a6c737d2241476f364f28c7de1b03a55..1ba6f07e92961077cdf002868666348eac323ed5 100644 (file)
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -23,13 +23,6 @@
 /* System performance - define the value i.e. CONFIG_SYS_XXX
 */
 
-/* Arbiter Configuration Register */
-#define CONFIG_SYS_ACR_PIPE_DEP        3       /* Arbiter pipeline depth (0-3) */
-#define CONFIG_SYS_ACR_RPTCNT  3       /* Arbiter repeat count (0-7) */
-
-/* System Priority Control Regsiter */
-#define CONFIG_SYS_SPCR_TSECEP 3       /* eTSEC1&2 emergency priority (0-3) */
-
 /* System Clock Configuration Register */
 #define CONFIG_SYS_SCCR_TSEC1CM        1               /* eTSEC1 clock mode (0-3) */
 #define CONFIG_SYS_SCCR_TSEC2CM        1               /* eTSEC2 clock mode (0-3) */
@@ -46,11 +39,6 @@
  */
 #define CONFIG_SYS_OBIR                0x30100000
 
-/*
- * IMMR new address
- */
-#define CONFIG_SYS_IMMR                0xE0000000
-
 /*
  * Device configurations
  */
@@ -70,9 +58,7 @@
 /*
  * DDR Setup
  */
-#define CONFIG_SYS_DDR_BASE            0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE      CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_SDRAM_BASE          0x00000000 /* DDR is system memory */
 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL  0x03000000
 #define CONFIG_SYS_83XX_DDR_USES_CS0
 
@@ -172,12 +158,6 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET     \
                        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8
-#define CONFIG_SYS_LBC_LBCR            0x00000000
 #define CONFIG_FSL_ELBC                1
 
 /*
@@ -188,9 +168,6 @@
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO            /* display empty sectors */
 
-/* FLASH */
-#define CONFIG_SYS_BR0_PRELIM  (0xFE000000 | BR_PS_16 | BR_MS_GPCM | BR_V)
-#define CONFIG_SYS_OR0_PRELIM  (OR_AM_8MB | OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_EHTR_SET | OR_GPCM_EAD)
 
 #define CONFIG_SYS_MAX_FLASH_BANKS     1 /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      256 /* max sectors per device */
@@ -204,22 +181,11 @@
  */
 #define CONFIG_SYS_NAND_BASE   0xE0600000
 
-/* NAND */
-#define CONFIG_SYS_BR1_PRELIM  (0xE0600000 | BR_DECC_CHK_GEN | BR_PS_8 | BR_MS_FCM | BR_V)
-#define CONFIG_SYS_OR1_PRELIM  (OR_AM_32KB | OR_FCM_CSCT | OR_FCM_CST | OR_FCM_CHT | OR_FCM_SCY_1 | OR_FCM_TRLX | OR_FCM_EHTR)
 
 /* Vitesse 7385 */
 
 #define CONFIG_SYS_VSC7385_BASE        0xF0000000
 
-#ifdef CONFIG_VSC7385_ENET
-
-/* VSC7385 */
-#define CONFIG_SYS_BR2_PRELIM          (0xF0000000 | BR_PS_8 | BR_MS_GPCM | BR_V)
-#define CONFIG_SYS_OR2_PRELIM          (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX_SET | OR_GPCM_EHTR_SET | OR_GPCM_EAD)
-
-#endif
-
 /*
  * Serial Port
  */
@@ -349,15 +315,6 @@
 /*
  * Environment
  */
-#ifndef CONFIG_SYS_RAMBOOT
-       #define CONFIG_ENV_ADDR         \
-                       (CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN)
-       #define CONFIG_ENV_SECT_SIZE    0x10000 /* 64K (one sector) for env */
-       #define CONFIG_ENV_SIZE         0x4000
-#else
-       #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-0x1000)
-       #define CONFIG_ENV_SIZE         0x2000
-#endif
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change */
@@ -391,14 +348,6 @@
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
-/*
- * Core HID Setup
- */
-#define CONFIG_SYS_HID0_INIT   0x000000000
-#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK \
-                               | HID0_ENABLE_INSTRUCTION_CACHE)
-#define CONFIG_SYS_HID2                HID2_HBE
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #endif