Blackfin: bf548-ezkit: bump SPI flash size up

[oweals/u-boot.git] / include / configs / MPC8360ERDK.h

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 6cee78aa260be77297f0944552ec7814ddf9e800..fc53ecc67a11c73d641628960c2f61d2b5d7acd3 100644 (file)
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -213,7 +213,6 @@
 #define CONFIG_NAND_FSL_UPM    1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_SYS_LBLAWBAR1_PRELIM    CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_LBLAWAR1_PRELIM     0x8000001b /* Access window size 4K */
@@ -238,7 +237,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -251,6 +249,7 @@
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef CONFIG_SYS_HUSH_PARSER
@@ -309,7 +308,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME                "FSL UEC0"
+#define CONFIG_ETHPRIME                "UEC0"
 
 #define CONFIG_UEC_ETH1                /* GETH1 */
 
@@ -319,7 +318,8 @@
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK9
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       2
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
 #define CONFIG_UEC_ETH2                /* GETH2 */
@@ -330,7 +330,8 @@
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK4
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       4
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 
 /*
@@ -402,16 +403,17 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT   0x000000000
+#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
+                                HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2                HID2_HBE
 
 /*
@@ -505,10 +507,6 @@
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
 #define CONFIG_HAS_ETH3
-#define CONFIG_ETHADDR 00:04:9f:ef:01:01
-#define CONFIG_ETH1ADDR        00:04:9f:ef:01:02
-#define CONFIG_ETH2ADDR        00:04:9f:ef:01:03
-#define CONFIG_ETH3ADDR        00:04:9f:ef:01:04
 #endif
 
 #define CONFIG_BAUDRATE 115200
@@ -517,10 +515,6 @@
 #define CONFIG_HOSTNAME        mpc8360erdk
 #define CONFIG_BOOTFILE        uImage
 
-#define CONFIG_IPADDR          10.0.0.99
-#define CONFIG_SERVERIP                10.0.0.2
-#define CONFIG_GATEWAYIP       10.0.0.2
-#define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_ROOTPATH                /nfsroot/
 
 #define        CONFIG_BOOTDELAY 2      /* -1 disables auto-boot */