sh: Fix compile error sh7763rdp board

[oweals/u-boot.git] / include / configs / MPC8360ERDK.h

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 0f5dea13d0d4bc963da370e944320b90df483390..ca8d53cf25303fb42ac1a9cec272dcd5de87b4e1 100644 (file)
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -30,8 +30,8 @@
  * System Clock Setup
  */
 #ifdef CONFIG_CLKIN_33MHZ
-#define CONFIG_83XX_CLKIN              33000000
-#define CONFIG_SYS_CLK_FREQ            33000000
+#define CONFIG_83XX_CLKIN              33333333
+#define CONFIG_SYS_CLK_FREQ            33333333
 #define PCI_33M                                1
 #define HRCWL_CSB_TO_CLKIN_MPC8360ERDK HRCWL_CSB_TO_CLKIN_10X1
 #else
@@ -195,7 +195,7 @@
                        (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
                        BR_V)   /* valid */
 #define CFG_OR0_PRELIM         ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
-                               OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | \
+                               OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
                                OR_GPCM_XACS | OR_GPCM_SCY_15 | \
                                OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
 
@@ -259,6 +259,7 @@
 /* Pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
+#define CONFIG_OF_STDOUT_VIA_ALIAS
 
 /* I2C */
 #define CONFIG_HARD_I2C                /* I2C with hardware support */
@@ -418,6 +419,8 @@
  * MMU Setup
  */
 
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
+
 /* DDR: cache cacheable */
 #define CFG_IBAT0L     (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT0U     (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
@@ -534,11 +537,11 @@
    "ubootfile=u-boot.bin\0"\
    "mtdparts=mtdparts=60000000.nand-flash:4096k(kernel),128k(dtb),-(rootfs)\0"\
    "setbootargs=setenv bootargs console=$consoledev,$baudrate "\
-               "$mtdparts panic=1\0"\
+               "$mtdparts panic=1\0"\
    "adddhcpargs=setenv bootargs $bootargs ip=on\0"\
    "addnfsargs=setenv bootargs $bootargs ip=$ipaddr:$serverip:"\
-               "$gatewayip:$netmask:$hostname:$netdev:off "\
-               "root=/dev/nfs rw nfsroot=$serverip:$rootpath\0"\
+               "$gatewayip:$netmask:$hostname:$netdev:off "\
+               "root=/dev/nfs rw nfsroot=$serverip:$rootpath\0"\
    "addnandargs=setenv bootargs $bootargs root=/dev/mtdblock3 "\
                "rootfstype=jffs2 rw\0"\
    "tftp_get_uboot=tftp 100000 $ubootfile\0"\
@@ -554,7 +557,7 @@
    "nand_read_kernel=nand read.jffs2 $loadaddr 0 400000\0"\
    "nand_read_dtb=nand read.jffs2 $fdtaddr 400000 20000\0"\
    "nor_reflash=protect off ff800000 ff87ffff ; erase ff800000 ff87ffff ; "\
-               "cp.b 100000 ff800000 $filesize\0"\
+               "cp.b 100000 ff800000 $filesize\0"\
    "nand_reflash_kernel=run tftp_get_kernel nand_erase_kernel "\
                "nand_write_kernel\0"\
    "nand_reflash_dtb=run tftp_get_dtb nand_erase_dtb nand_write_dtb\0"\