new at91_emac network driver (NET_MULTI api)

[oweals/u-boot.git] / include / configs / MPC8360ERDK.h

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 68d68bbf3203a6538fb0e9316c008476b619c3b3..c6f1409302747bdacd22c2fa312f4229bf51926e 100644 (file)
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -177,7 +177,8 @@
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
 #define CONFIG_SYS_LBC_LBCR            0x00000000
 
 /*
@@ -212,7 +213,6 @@
 #define CONFIG_NAND_FSL_UPM    1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_SYS_LBLAWBAR1_PRELIM    CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_LBLAWAR1_PRELIM     0x8000001b /* Access window size 4K */
@@ -318,7 +318,8 @@
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK9
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       2
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
 #define CONFIG_UEC_ETH2                /* GETH2 */
@@ -329,7 +330,8 @@
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK4
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       4
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 
 /*
@@ -530,7 +532,7 @@
    "consoledev=ttyS0\0"\
    "loadaddr=a00000\0"\
    "fdtaddr=900000\0"\
-   "fdtfile=dtb\0"\
+   "fdtfile=mpc836x_rdk.dtb\0"\
    "fsfile=fs\0"\
    "ubootfile=u-boot.bin\0"\
    "mtdparts=mtdparts=60000000.nand-flash:4096k(kernel),128k(dtb),-(rootfs)\0"\