Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature

[oweals/u-boot.git] / include / configs / MPC8360EMDS.h

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index fe6ec48ca4a6a5f47765bcc0633e79674abafc46..c8db10b2b91f903c95181ea0b2a8fc238f28e979 100644 (file)
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -185,7 +185,8 @@
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_4)
+#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
 #define CONFIG_SYS_LBC_LBCR            0x00000000
 
 /*
@@ -306,7 +307,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
@@ -319,6 +319,7 @@
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
+#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
 #ifdef CONFIG_SYS_HUSH_PARSER
@@ -382,11 +383,13 @@
 #define CONFIG_NET_MULTI       1
 #endif
 
+#define CONFIG_HWCONFIG                1
+
 /*
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME                "FSL UEC0"
+#define CONFIG_ETHPRIME                "UEC0"
 #define CONFIG_PHY_MODE_NEED_CHANGE
 
 #define CONFIG_UEC_ETH1                /* GETH1 */
@@ -397,7 +400,8 @@
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK9
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       0
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
 #endif
 
 #define CONFIG_UEC_ETH2                /* GETH2 */
@@ -408,7 +412,8 @@
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK4
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       1
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_GMII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
 #endif
 
 /*
@@ -489,8 +494,9 @@
 /*
  * Core HID Setup
  */
-#define CONFIG_SYS_HID0_INIT           0x000000000
-#define CONFIG_SYS_HID0_FINAL          HID0_ENABLE_MACHINE_CHECK
+#define CONFIG_SYS_HID0_INIT   0x000000000
+#define CONFIG_SYS_HID0_FINAL  (HID0_ENABLE_MACHINE_CHECK | \
+                                HID0_ENABLE_INSTRUCTION_CACHE)
 #define CONFIG_SYS_HID2                HID2_HBE
 
 /*
@@ -582,14 +588,12 @@
 
 #if defined(CONFIG_UEC_ETH)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR 00:04:9f:ef:01:01
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR 00:04:9f:ef:01:02
 #endif
 
 #define CONFIG_BAUDRATE 115200
 
-#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
+#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
 #define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
@@ -599,7 +603,7 @@
    "consoledev=ttyS0\0"                                                        \
    "ramdiskaddr=1000000\0"                                             \
    "ramdiskfile=ramfs.83xx\0"                                          \
-   "fdtaddr=400000\0"                                                  \
+   "fdtaddr=780000\0"                                                  \
    "fdtfile=mpc836x_mds.dtb\0"                                         \
    ""