Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value

[oweals/u-boot.git] / include / configs / MPC8349ITX.h

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 117f745f26162417a476fb4618761b2238b9f686..de233ffe627a3ed8243f7133ae98e72367c478c2 100644 (file)
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -56,7 +56,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#if (TEXT_BASE == 0xFE000000)
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)
 #define CONFIG_SYS_LOWBOOT
 #endif
 
@@ -67,6 +67,10 @@
 #define CONFIG_MPC834x         /* MPC834x family (8343, 8347, 8349) */
 #define CONFIG_MPC8349         /* MPC8349 specific */
 
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xFEF00000
+#endif
+
 #define CONFIG_SYS_IMMR                0xE0000000      /* The IMMR is relocated to here */
 
 #define CONFIG_MISC_INIT_F
@@ -292,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * U-Boot memory configuration
  */
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
@@ -302,10 +306,9 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xFD000000      /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END        0x1000          /* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_SIZE       0x1000          /* Size of used area in RAM*/
 
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100           /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
@@ -394,8 +397,8 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #endif
 
-#define PCI_66M
-#ifdef PCI_66M
+#define CONFIG_PCI_66M
+#ifdef CONFIG_PCI_66M
 #define CONFIG_83XX_CLKIN      66666666        /* in Hz */
 #else
 #define CONFIG_83XX_CLKIN      33333333        /* in Hz */
@@ -660,14 +663,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_DBAT7L      CONFIG_SYS_IBAT7L
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
@@ -716,11 +711,11 @@ boards, we say we have two, but don't display a message if we find only one. */
        "netdev=" MK_STR(CONFIG_NETDEV) "\0"                            \
        "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
        "tftpflash=tftpboot $loadaddr $uboot; "                         \
-               "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
-               "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
-               "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
-               "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
-               "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
+               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
+               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
+               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
+               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
+               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
        "fdtaddr=780000\0"                                              \
        "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"