Convert CONFIG_BZIP2 et al to Kconfig

[oweals/u-boot.git] / include / configs / MPC8349ITX.h

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 1c8574a40f374c5a275db23ddcef4fc44a6aa675..dd517639ea45812ccc68189d0013c254f529adcb 100644 (file)
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -52,6 +52,7 @@
 #define CONFIG_SYS_USB_HOST    /* use the EHCI USB controller */
 #endif
 
+#include <linux/stringify.h>
 #define CONFIG_RTC_DS1337
 #define CONFIG_SYS_I2C
 
@@ -142,12 +143,8 @@
 /*
  * DDR Setup
  */
-#define CONFIG_SYS_DDR_BASE            0x00000000 /* DDR is system memory*/
-#define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE      CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_SDRAM_BASE          0x00000000 /* DDR is system memory*/
 #define CONFIG_SYS_83XX_DDR_USES_CS0
-#define CONFIG_SYS_MEMTEST_START       0x1000  /* memtest region */
-#define CONFIG_SYS_MEMTEST_END         0x2000
 
 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL  (DDR_SDRAM_CLK_CNTL_SS_EN \
                                        | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
@@ -211,12 +208,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #define CONFIG_SYS_VSC7385_BASE        0xF8000000
 
-#ifdef CONFIG_VSC7385_ENET
-
-
-#endif
-
-
 #define CONFIG_SYS_LED_BASE    0xF9000000
 
 
@@ -252,21 +243,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (256 * 1024) /* Reserved for malloc */
 
-/*
- * Local Bus LCRR and LBCR regs
- *    LCRR:  DLL bypass, Clock divider is 4
- * External Local Bus rate is
- *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
- */
-#define CONFIG_SYS_LCRR_DBYP   LCRR_DBYP
-#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
-#define CONFIG_SYS_LBC_LBCR    0x00000000
-
-                               /* LB sdram refresh timer, about 6us */
-#define CONFIG_SYS_LBC_LSRT    0x32000000
-                               /* LB refresh timer prescal, 266MHz/32*/
-#define CONFIG_SYS_LBC_MRTPR   0x20000000
-
 /*
  * Serial Port
  */
@@ -363,16 +339,6 @@ boards, we say we have two, but don't display a message if we find only one. */
  */
 #define CONFIG_ENV_OVERWRITE
 
-#ifndef CONFIG_SYS_RAMBOOT
-  #define CONFIG_ENV_ADDR      \
-                       (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-  #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */
-  #define CONFIG_ENV_SIZE      0x2000
-#else
-  #define CONFIG_ENV_ADDR      (CONFIG_SYS_MONITOR_BASE - 0x1000)
-  #define CONFIG_ENV_SIZE      0x2000
-#endif
-
 #define CONFIG_LOADS_ECHO      /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
@@ -403,8 +369,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 /*
  * System performance
  */
-#define CONFIG_SYS_SPCR_TSEC1EP        3       /* TSEC1 emergency priority (0-3) */
-#define CONFIG_SYS_SPCR_TSEC2EP        3       /* TSEC2 emergency priority (0-3) */
 #define CONFIG_SYS_SCCR_TSEC1CM        1       /* TSEC1 clock mode (0-3) */
 #define CONFIG_SYS_SCCR_TSEC2CM        1       /* TSEC2 & I2C0 clock mode (0-3) */
 #define CONFIG_SYS_SCCR_USBMPHCM 3     /* USB MPH controller's clock */