ColdFire: Cache update for all platforms

[oweals/u-boot.git] / include / configs / MPC8323ERDB.h

diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index c40d3d3f4a3e5b8f8594a38fddac726555e5d9c5..4046f80b5a5caf942aac22c3011171249353ab87 100644 (file)
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -170,7 +170,8 @@
 /*
  * Local Bus Configuration & Clock Setup
  */
-#define CONFIG_SYS_LCRR                (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LCRR_DBYP           LCRR_DBYP
+#define CONFIG_SYS_LCRR_CLKDIV         LCRR_CLKDIV_2
 #define CONFIG_SYS_LBC_LBCR            0x00000000
 
 /*
@@ -346,7 +347,8 @@
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK10
 #define CONFIG_SYS_UEC1_ETH_TYPE       FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       4
-#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED        100
 #endif
 
 #define CONFIG_UEC_ETH2                /* ETH4 */
@@ -357,7 +359,8 @@
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK3
 #define CONFIG_SYS_UEC2_ETH_TYPE       FAST_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       0
-#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_100_MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED        100
 #endif
 
 /*
@@ -522,17 +525,11 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_HAS_ETH0                                /* add support for "ethaddr" */
-#define CONFIG_ETHADDR 00:04:9f:ef:03:01
 #define CONFIG_HAS_ETH1                                /* add support for "eth1addr" */
-#define CONFIG_ETH1ADDR        00:04:9f:ef:03:02
 
 /* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CONFIG_SYS_I2C_EEPROM) */
 #define CONFIG_SYS_I2C_MAC_OFFSET      0x7f00  /* MAC address offset in I2C EEPROM */
 
-#define CONFIG_IPADDR          10.0.0.2
-#define CONFIG_SERVERIP                10.0.0.1
-#define CONFIG_GATEWAYIP       10.0.0.1
-#define CONFIG_NETMASK         255.0.0.0
 #define CONFIG_NETDEV          eth1
 
 #define CONFIG_HOSTNAME                mpc8323erdb